ElectricMotorcycleForum.com

  • September 02, 2026, 12:53:59 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

Electric Motorcycle Forum is live!

Pages: 1 2 [3]

Author Topic: Zero SR/F Dashboard on a Zero (D)S(R) using CanBus  (Read 15298 times)

remmie

  • Sr. Member
  • ****
  • Posts: 318
    • View Profile
Re: Zero SR/F Dashboard on a Zero (D)S(R) using CanBus
« Reply #30 on: August 27, 2019, 01:53:13 PM »
Speeeeeed! :)
Logged
Current : Red Premium Zero SR/F (ordered May 25, delivered August 23 2019) with Rapid charger for 12kW charging
Former : White Zero SR 2018 ZF14.4 kWh (17.500 km)
Former : Black Zero SR 2014 ZF11.4 kWh (25.000 km)
SR's outfitted with Homemade "Supercharger" 6x eltek Flatpack S (12 kW)

remmie

  • Sr. Member
  • ****
  • Posts: 318
    • View Profile
Re: Zero SR/F Dashboard on a Zero (D)S(R) using CanBus
« Reply #31 on: August 27, 2019, 01:53:57 PM »
Quote from: togo on August 27, 2019, 03:05:41 AM
> Impressed with the new dash of the Zero SR/F dashboard with the TFT screen I tried to create a similar screen for my 2018 Zero SR...

You and crashcash are inspiring!

We want pictures :) :)  8)
Logged
Current : Red Premium Zero SR/F (ordered May 25, delivered August 23 2019) with Rapid charger for 12kW charging
Former : White Zero SR 2018 ZF14.4 kWh (17.500 km)
Former : Black Zero SR 2014 ZF11.4 kWh (25.000 km)
SR's outfitted with Homemade "Supercharger" 6x eltek Flatpack S (12 kW)

ben.m

  • Newbie
  • *
  • Posts: 35
    • View Profile
Re: Zero SR/F Dashboard on a Zero (D)S(R) using CanBus
« Reply #32 on: August 27, 2019, 02:08:50 PM »
Quote from: remmie on August 27, 2019, 01:53:13 PM
Speeeeeed! :)

Ok, why not :)
You can see quickly how close to the maximum speed you are.

You should make it turn into red after passing the legal speed limit, using GPS and maps data (a lot of work maybe)
Logged

2018DSR

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: Zero SR/F Dashboard on a Zero (D)S(R) using CanBus
« Reply #33 on: January 21, 2023, 11:21:47 PM »
Hi Remmie
I know this is a while ago but what chip was on SKPang board as the link is broken and the SKPang feather now has a SN65HVD231 CAN transceiver.
Trouble is that is runs at 16mhz and I beleive the Zero runs at 8Mhz, can you confirm.
I can read data with an MCP2515 set to 500KBPS and 8MHZ but I was hoping on using an esp32 feather.
Logged

Amazombi

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Zero SR/F Dashboard on a Zero (D)S(R) using CanBus
« Reply #34 on: March 28, 2023, 06:31:29 PM »
Quote from: 2018DSR on January 21, 2023, 11:21:47 PM
Hi Remmie
I know this is a while ago but what chip was on SKPang board as the link is broken and the SKPang feather now has a SN65HVD231 CAN transceiver.
Trouble is that is runs at 16mhz and I beleive the Zero runs at 8Mhz, can you confirm.
I can read data with an MCP2515 set to 500KBPS and 8MHZ but I was hoping on using an esp32 feather.
Hello. I also recreated this great thing. had problems with canfeather. already tried everything and then simply (as you wrote) set the baud rate to 1000 in the sketch. then it works. is of course not the right solution.

Logged

Amazombi

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Zero SR/F Dashboard on a Zero (D)S(R) using CanBus
« Reply #35 on: March 24, 2025, 11:42:15 PM »
Hey all. I've now derived the time and date from CAN address 0508. It works. I use the display (without the speedometer) to see all the Zero data. I have separate battery voltages for Accu 1/12.5 and Accu 2/7.2.
« Last Edit: March 24, 2025, 11:44:27 PM by Amazombi »
Logged

T.S. Zarathustra

  • Full Member
  • ***
  • Posts: 146
    • View Profile
Re: Zero SR/F Dashboard on a Zero (D)S(R) using CanBus
« Reply #36 on: March 25, 2025, 02:11:46 PM »
Great project. Thanks to everyone who has shared code and suggested/made improvements.

“If I have seen further, it is by standing on the shoulders of giants.” Sir Isaac Newton.


Logged
Pages: 1 2 [3]