1
Damon / Re: Damon stock anyone?
« on: July 10, 2024, 12:09:08 PM »
Nice 
I’ve got $100 to invest, as soon as I get my deposit back.
I’ve got $100 to invest, as soon as I get my deposit back.
|
ElectricMotorcycleForum.com
- September 01, 2026, 05:44:08 PM
- Welcome, Guest
News:
Electric Motorcycle Forum is live!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Buy Sell Trade / Re: Screw Tray Organizer for Zero Motorcycles SR/S 2021
« on: January 27, 2024, 09:05:05 PM »
Nice 👍
3
Zero Motorcycles Forum | 2013+ / Re: The Zero's fairing hardware was ugly and offended my sensibilities, so...
« on: November 18, 2023, 08:41:03 PM »
Nice
Where did you get those?
Especially the Bar Ends?
(I couldn't make out the lettering)
Where did you get those?
Especially the Bar Ends?
(I couldn't make out the lettering)
4
Zero Motorcycles Forum | 2013+ / Re: Zero OEM upgrades and accessories are overpriced and mostly junk
« on: November 18, 2023, 08:26:27 PM »
Guess you didn't try the Zero CenterStand?
I found it lacks leverage, to lift the bike.
Anyone tried the T-Rex CenterStand?
I have the Zero [MRA] Touring Screen.
It does require you to tuck, just a bit, to avoid the helmet buffeting.
It’s mostly a highway piece, as you do get extra noise on street (un-tucked).
I installed w/o the Perimeter Molding.
Would that molding improve deflection?
or
Is it just for negative cosmetics?
I found it lacks leverage, to lift the bike.
Anyone tried the T-Rex CenterStand?
I have the Zero [MRA] Touring Screen.
It does require you to tuck, just a bit, to avoid the helmet buffeting.
It’s mostly a highway piece, as you do get extra noise on street (un-tucked).
I installed w/o the Perimeter Molding.
Would that molding improve deflection?
or
Is it just for negative cosmetics?
5
Zero Motorcycles Forum | 2013+ / Re: Driving modes - SR/F 2020 MBB v27 - technical
« on: January 19, 2023, 09:30:58 PM »OTW home tonight I used sport.
The high speed turnpike route I use is full of construction so there was only one place to try top speed, right at the end. With motor and battery at low temp, 50% SOC tried maximum speed starting from a base of 90mph. It was at 115 at the end of that run. Subjectively it felt exactly the same, and objectively the top speed was the same. Not science, just observations.
You might be the only guy on here pushing Top Speed.
Have you ever done a GPS App verification, to compare against the Speedometer reading?
I'll do same, next time I'm on highway (but not all the way to top speed ; )
6
Zero Motorcycles Forum | 2013+ / Re: Driving modes - SR/F 2020 MBB v27 - technical
« on: January 19, 2023, 12:21:52 PM »
Great Info!
After past FW Power/Torque loss issues, I switched to Sport to minimize the losses.
I stayed w/ Sport, after the issues got resolved in latest FW.
Lately been playing with Custom to get Less Regen (setting to 18% in app) as I prefer to slow via brakes.
After past FW Power/Torque loss issues, I switched to Sport to minimize the losses.
I stayed w/ Sport, after the issues got resolved in latest FW.
Lately been playing with Custom to get Less Regen (setting to 18% in app) as I prefer to slow via brakes.
7
Zero Motorcycles Forum | 2013+ / Re: Really just a rant about Zero's lack of customer support
« on: January 19, 2023, 11:47:33 AM »
So hilarious but mostly sad 
I can only imagine how badly they would have botched the Ignition Replacement job, had you taken it to them.
Then they assume you did a worse job than their inept techs
Not to jinx myself, but my SR/S has been rock-solid (I assume most peoples experience is similar).
I was just reviewing my maintenance records and the only think i've done is rear-pads, because of squeaking.
Unfortunately, the Ferodo replacements, might even squeak worse
If i had to nit-pick, I guess some issues are moisture stains, inside the Headlights & LCD Panel.
I never even rode in rain, but I gave up caring about that minor cosmetic issue, after I realized what a nightmare it would be to seek a warranty claim.
Even if the bikes are mostly maintenance & trouble free, is no excuse for the horrific Customer Support.
With Zero dealers being so inept, Zero needs to be more involved in supporting Dealers & Customers.
I can only imagine how badly they would have botched the Ignition Replacement job, had you taken it to them.
Then they assume you did a worse job than their inept techs
Not to jinx myself, but my SR/S has been rock-solid (I assume most peoples experience is similar).
I was just reviewing my maintenance records and the only think i've done is rear-pads, because of squeaking.
Unfortunately, the Ferodo replacements, might even squeak worse
If i had to nit-pick, I guess some issues are moisture stains, inside the Headlights & LCD Panel.
I never even rode in rain, but I gave up caring about that minor cosmetic issue, after I realized what a nightmare it would be to seek a warranty claim.
Even if the bikes are mostly maintenance & trouble free, is no excuse for the horrific Customer Support.
With Zero dealers being so inept, Zero needs to be more involved in supporting Dealers & Customers.
8
Zero Motorcycles Forum | 2013+ / Re: Cypher upgrades for SRF/SRS 2019, 2020, 2021
« on: November 26, 2022, 09:11:54 PM »By the way. I met my Zero dealer last week, he was surprised that I could buy the parking mode on my own, without the need of entering a dealer code. I suppose the margin is now all by Zero headquarters.Do you have Parking Mode enabled now?
If so, what was involved?
9
Zero Motorcycles Forum | 2013+ / Re: Firmware updating tip for SR/S
« on: November 09, 2022, 11:51:49 PM ».... Last time, the bike was rendered unusable. It was locked up somehow, and the dealer had to come get it, reset something, and put the updates in. ....Similar happened to me.
My bike stayed ON but Non-Responsive, all night, after a failed FW Update.
Even removing all fuses had no effect.
Didn't disconnect the 12V, because the Terminal-Screws were overly-tight and I didn't want to break the Terminals.
Put it on a Tender to keep the 12V alive thru the night.
I called Zero the next day.
The friendly gal said to use the app to connect via BT and initiate a FW Update.
The only thing I hadn't tried
Well it worked and it reset the bike, making it useable again
Kept me away from the dealer
10
Zero Motorcycles Forum | 2013+ / Re: New dash firmware
« on: September 25, 2022, 06:48:15 AM »
+1 for New Dash FW being awful.
Old Dash is far superior.
I compared both thoroughly, on a '22 at the Dealer, and it killed any desire I had to upgrade to a '22.
A Zero tech did tell me (via email) that I could get "Parking Mode" and retain the old Dash FW.
Hope he is right...but I don't want to be the first one to try it
Old Dash is far superior.
I compared both thoroughly, on a '22 at the Dealer, and it killed any desire I had to upgrade to a '22.
A Zero tech did tell me (via email) that I could get "Parking Mode" and retain the old Dash FW.
Hope he is right...but I don't want to be the first one to try it
11
Zero Motorcycles Forum | 2013+ / Re: quick question about "High Throttle Fault"
« on: September 25, 2022, 06:26:32 AM »
I wonder if there is a "secret" routine for Throttle Recalibration?
12
Zero Motorcycles Forum | 2013+ / Re: Quick and easy rain cover for charge port for SRS SRF
« on: September 25, 2022, 06:14:22 AM »
Good Idea.
I guess that's why Cars have their J1772 mounted sideways.
I guess that's why Cars have their J1772 mounted sideways.
13
Zero Motorcycles Forum | 2013+ / Re: Safe for another year!
« on: September 25, 2022, 06:03:03 AM »
I don't hate that '23 color.
The '22 color was awful IMHO.
Still think the 20/21 Blue is the best
The '22 color was awful IMHO.
Still think the 20/21 Blue is the best
14
Zero Motorcycles Forum | 2013+ / Re: New SR/F and SR/S firmware
« on: August 04, 2022, 07:54:30 AM »
Also reporting v24/v20 FW update went smoothly.
Placing Phone on Charge Port (w/ Door flipped open) has been working so far... (coincidence?)
Bike seems to run great.
Only done short trips, since updating, so no complaints at moment.
Placing Phone on Charge Port (w/ Door flipped open) has been working so far... (coincidence?)
Bike seems to run great.
Only done short trips, since updating, so no complaints at moment.
15
Zero Motorcycles Forum | 2013+ / Re: My ideal Zero
« on: July 25, 2022, 10:21:38 PM »You are right Don. The Delta Q charger is 850 watts. My home doesn't have 240Vs, just 120V. I still think that the OBC gets too hot for its own good when charging for a long time and that heat likely leads to one of its components failing eventually. I bet that if it had a fan to keep it cool it would last a lot longer. That Delta Q is a real brick. While it also gets pretty hot when charging, at least it has plenty of fins to keep it cool, especially when being used in my 60 degree F garage.
Friends don't let friends charge at 120v
Here is what you need to start charging at 220v, in any house (except for the one described by DonTom)
https://quick220.com/products/copy-of-model-a220-15d-plus-2-adapters-for-international-plugs
https://www.ebay.com/itm/304570594177?hash=item46e9d27381:g:LacAAOSw5-xifd7f
I've been using this myself, since the Volt days of 2016.
The Chevy EVSE only draws 12A (at 220v) making it safe for residential 15A Circuits.
You end up with 2.9kW charging, which was plenty for me; on a Volt, Bolt & SR/S.
The secret is, the Chevy EVSE (and probably all L1 EVSE) provide L2 [220V] charging, when you connect them to 220V.
So the cord that came w/ your Zero might work too.
It you want, I can test my Zero L1 cord and confirm.
(I had already loaded up on Chevy EVSE's before getting a SR/S.)
L1 EVSE are low draw [12A] so they can work with the Quick220 and normal 15A Circuits.
You just need to find (2) Circuits on different phases (for the Quick220), which isn't hard to do.
It's all vetted on the Volt Forums and Quick 220 has more info, on their web site, as well.
Any questions; PM me and/or post here.