3
« on: April 28, 2025, 07:43:08 PM »
Damn. Thanks for pointing that out, not sure what I was thinking. Not to turn this into a support thread, but is the sevcon related at all? The logs seem to be showing possibly multiple issues at once.
01/26/2025 15:48:41 SEVCON CAN EMCY Frame Error Code: 0x1000, Error Reg: 0x01 Sevcon Error Code: 0x4884, Data: 0x00 0x00 0x00 0x58 0x02 , Sequence Fault
07048
Then later:
07063 01/26/2025 15:49:23 Calex 720W Charger 0 Connected
07064 01/26/2025 15:49:23 Calex 1200W Charger 1 Connected
Then:
07647 04/23/2025 06:30:29 ERROR: Cannot Connect Module 00! modv=109925mV, maxv=109925mV, minv=109925mV, raw0:109902mV, raw1:0mV, cur0:0A, cur1:0A, diff_allowed: 1727mV
07648 04/23/2025 06:30:29 DEBUG: Module 00 Contactor is now Open
07649 04/23/2025 06:30:29 Module 00 vmod: 109.902V, batt curr: 0A
07650 04/23/2025 06:30:29 BMS0 retry count is now 1
07651 04/23/2025 06:30:30 Module 00 vmod: 109.932 maxsys: 109.932 minsys: 109.932 diff: 0.000 vcap: 107.687 prechg: 97%
07652 04/23/2025 06:30:30 DEBUG: Module 00 Contactor is now Closed