Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Bigalfromwigan

Pages: [1]

Buy Sell Trade / Re: Wanted: Delta Quiq Charger for Zero S (ideally in UK)

« on: February 14, 2024, 10:24:12 PM »

I know a man who has just been knocked off his Zero so he might want to sell his QuiQ charger. I'll ask him.

Energica / EVA Centre stand

« on: February 14, 2024, 07:30:53 PM »

Any news on the centre stand for this bike?

Energica / Mirror extenders

« on: February 14, 2024, 07:30:05 PM »

I have just become the proud owner of a 5 year old Energica EVA107. The first ride out, I was constantly adjusting the mirrors but could not find that sweet spot. I think if the mirror mounts were a little longer they might be OK, so I examined the mirrors closely and found that there is an adjuster of sorts on the mount behind the mirror (as you look at it) and it occurred to me that if I could find an extender for that mount it might be just the thing I need.
My question is two fold - first, has anybody found a suitable extender for this application and second, if not, does anybody have the spec for the thread on that part.
If necessary I thought I might get a couple made and if it's a success, I could offer them on here at cost.
Thanks in advance for any help.

Zero Motorcycles Forum | 2013+ / Re: 2013 S wire diagram

« on: August 17, 2023, 02:19:11 PM »

Is there any chance you can share the file that Zero sent to you? I am looking to interface a 2.5kw charge tank as an external charger but I have no clue how to make it switch on without knowing what the connections are and I think your diagram might have the data I need.

Quote from: trikester on June 14, 2014, 07:22:14 PM

It looks like your schematic will be easier to follow than the one Zero sent me when I bought the Powertrain kit for building my e-trike.

The paper size of Zero's schematic is approx 3' x 4' (when printed full size from my computer) and it is pretty full. I had to hang it on the wall to use it. Are you going to break yous up into separate drawings to make smaller prints? I originally tried to use a smaller printout for the entire schematic but it was too hard to read.

Sure wish I could save you this work and send mine but a signed agreement is to be honored.

Trikester

Parts, Mods And Hacks / Zero 2.5kw Charge Tank Fitting

« on: August 14, 2023, 09:25:48 PM »

I own a 2019 Zero SZF14.4 and I have bought a used charge tank to fit to it. However, the seller and I did not know that this was the early 2.5kw version of the charge tank and as such it does not fit my bike.

Physically I can mount it to the bike but electrically, they are not compatible due to the connector that interfaces to the bike. This six way connector does not have an equivalent on the bike so I can't connect it to make it operate.

So does anybody have any knowledge of this charge tank such that I could find a way to use it? Has anybody managed to achieve this?

Zero Motorcycles Forum | 2013+ / Charge tank fitting.

« on: August 06, 2023, 01:44:44 AM »

Hi guys, I have a 2019 Zero Szf14.4. I also have a 2.5kw onboard charger (genuine Zero).
The problem is that there is a multi-way (6 pin connector) labelled “CHGR SIG TO BIKE” attached to the charger, With no matching connector on the bike.
Does anybody have any information that will help me interfacing these two together?
Tia