ElectricMotorcycleForum.com

  • September 01, 2026, 06:07:58 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

Electric Motorcycle Forum is live!

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - pattersonimages

Pages: [1]
1
if you have an old battery gathering dust - i'd be happy to buy the BMS if you can pull it!
Mine is toast. would like to use another factory one to keep it clean.
thanks
Jeff

2
Zero Motorcycles Forum | 2012 and older / 2010 zero MX BMS / MBB
« on: July 12, 2020, 11:11:54 AM »
Looking for a stock BMS for a 2010 MX.  Also possibly a MBB.  Anyone happen to have an extra?
thanks
Jeff
 

3
ANyone know where I can find a factory charger/inverter cover plastic?

4
Still have it?

6
certainly!
I've added a link to this thread to the unofficial manual article: https://zeromanual.com/wiki/Gen1/Battery_Rebuild

May I upload your photos to the manual? Any notes you want added I can help edit as well. Thanks!

7
It works.  i'll upload more images shortly!

8
Fitting the first 5 modules required nothing more than the 2 drilled holes through the lower frame / brace- just under where the stock battery box sat.  Also - from my measurements - the stock factory battery compartment bracees- that can me unscrewed/removed are almost exactly at the correct height to lock down the leaf modules.  I picked up some 2" aluminium angle from the local home dept, and cut to length slightly longer than the leaf modules.  Using 4 carriage bolts, and some JB weld - I marked out the bracket that will run under the inner 5 cells - and create the external cage to place the vertical cell ( one on each side).


9
HOW to fit these in.... Drilled 2 x 5/16" holes for threaded rod in the lower crossmember.  Can "just" sneak 5 modules under the upper main bar.- with room for wiring out back.

10
Well, decided to drop in and make this bike run.  Picked up 7 GEN1 leaf modules and started tinkering today.

11
Old thread.. but has Anyone transplanted gen1 LEAF modules in a 2010 MX? Did not realize how large they were.  Looking for options to get this bike running again, guessing will have to get creative with cell placement...

Pages: [1]