ElectricMotorcycleForum.com

  • September 02, 2026, 01:26:38 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

Electric Motorcycle Forum is live!

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - greentorque79

Pages: [1]
1
Energica / EVA's Drivers for Headlights
« on: June 07, 2023, 03:51:47 PM »
Hi.

I have a defect driver on one of the lower beams. I already tested swapping the other driver from the other liver beam and it worked so ruled out any other issues.
My problem is the drivers do not have any make / part number on them NOTHING.
So my questions is does anybody know what brand / part I could use?
I already contacted the local reseller / Energica official repair shop and the quoted me the complete headlight. I was specific what part I asked but the do not care.
So maybe anybody can help?

2
Energica / Re: 12v Outlet / connection point for Navigation
« on: August 03, 2018, 12:22:52 AM »
Quote from: Demoni on July 28, 2018, 04:12:03 PM
The usb outlet is now a standard part on EVA but it use to be a optional extra.

It uses a 12v connection located behind the left side of your dash. Search google for "Dannemann 2 Pin" to find a compatible connector.
If your bike dose have the USB you can build a break out cable.

Please note you might need to install a fuse to make this port live. Fuse block is located under the right side tank cover, if fuse 6 is not present just install a 5A mini ATO fuse.

The connector is switched so when the bike is off it is not live.

As a Technician i greatly appreciate your thorough description  :D Greatly appreciate it!!!
I know the Dannemann 2 Pin connector type. I have some of them at home :-) Thank you very much!!! And welcome to the forum  ;) (I am pretty new here myself)
Cheers!

3
Energica / Re: 12v Outlet / connection point for Navigation
« on: August 03, 2018, 12:15:08 AM »
Quote from: ultrarnr on July 26, 2018, 09:35:15 PM
The Eva has a dual USB port. You can connect into the power cables for that plug to run your GPS, that is what I did.

Thanks!  8) Sounds good. I will definitely check that out!

4
Energica / Re: 12v Outlet / connection point for Navigation
« on: August 03, 2018, 12:13:59 AM »
Quote from: Anubis-R on July 26, 2018, 07:54:37 PM
Hi,
I'm waiting for my EVA to finally reach my garage too, so I can't check right now :D

But a std USB cable should be available for your garmin. Every electronic device today are compatible w/ direct 5V current coming from any USB port.

This should handle the navigation system without any mods (in case 12V is not available on EVA)

Thanks for the suggestion  :) My Garmin 590LM has a cradle/mount where it is inserted and water resistant with gold pins. It also has a USB port/connection hidden under a rubber cap but mainly for updating (it can be charges through that port but is not designed for that and the port would be be damaged when it rains so that's not an option for me.

5
Energica / 12v Outlet / connection point for Navigation
« on: July 26, 2018, 07:01:21 PM »
Hi Everyone.

I am waiting for my Eva and was wondering if someone knows if ther is a 12v connector / point somewhere where it is possible to connect a navigation system (I have a Garmin).
I know there is a USB plug on the bike for phones but I need 12 v for the navigation system.

Best reg,
Andreas from Sweden

6
Energica / Re: EVA CANbus
« on: July 26, 2018, 06:55:27 PM »
That sounds interesting! 👍🏻 Would be great to know more if this is possible and what camera you would use also and how to access the raspberry pie.


Pages: [1]