ElectricMotorcycleForum.com

Noise stopped issues stopped after throttle removed. I assume there related.

Biggest issue now is mating my domino with the zero.
Zero has wires as follows wires are white with different color stripes

Orange
Green
Green
Blue

Domino is
White - ground
Brown - signal
Blue - positive
Green
Green


The stock Magura throttle I removed only had two wires Brown and Black. They were connected to the last two wires on the Zero, Green and Blue. I'm not sure which to which. Or even if this throttle worked on the bike as I bought it non running.

The real question is what do I pair up with the zeros four wires to the dominos three?
I've tried multiple combinations. Was able to remove error codes and get the screen to work but still not working. Anyone have the solution?

Thanks for the help! I took the magura throttle housing apart and messed with it. Symptoms went away, error code stopped flashing but not working...

Error code is throttle is on or disconnected. I greased contacts, took it apart can't see anything alarming.