ElectricMotorcycleForum.com

Motor - 3KW(6KW max)
Battery - 3.1KW(BostonPower 5300mah 13S12P 156pcs)
Rama - duralumin D16T
Wheels - 24 x 100
Brakes - hydraulics 6 pistons 203mm
Fork - parallelogram 8 plates
Rear suspension - gas shock absorber
Controlling settings via Bluetooth
Speed - up to 70km / h
Mileage on one charge - up to 100km
Weight - 45KG
Charging - 1800W Eaton

3000$
Shiping from Russia

Quote from: Alex1971 on February 08, 2016, 12:24:06 AM

Quote from: Erasmo on February 08, 2016, 12:02:59 AM

Quote from: Alex1971 on February 07, 2016, 11:27:37 PM

Quote from: Erasmo on February 06, 2016, 11:39:29 PM

I might be interested, are you willing to make them ready to use on a '15 Zero and if so at what cost?

What is the voltage and current you need? What is the voltage of your electric network?

The battery voltage is 115V when full, my network voltage is 230V.

You will need 2 x 30 Amp 57.5Volt = 115 Volt 30 Amp 2 unit (series), 3450 watts. Price = 300Eur +shipping!

The specs say 37.5 amps maximum .. presumably 48V (1800/48 = 37.5) .. that's about 10% SOC for our Zeros. It looks like these would charge a 2014 from 10% to 60% in about an hour, when used with the onboard charger.

I'm trying to find some information on how these behave in a constant-current mode. Doc, I think you've used these before?

How much is shipping to the US?

Diodes I install!50$ for 1pcs 65$ for 2pcs via EMS!

New arrival ! There are 6 pieces !!

Last one.

Yes and that is with the correct programming and anderson plug for a 2015 DS?

I program the chargers 115 volt 30 amp! But I do not have connectors for Zero!

I might be interested, are you willing to make them ready to use on a '15 Zero and if so at what cost?

What is the voltage and current you need? What is the voltage of your electric network?

I have access to both 110V and 220V outlets. But yes power would be less on 110V outlet. 

I have 28s Nissan Leaf pack. I charge to 116.5V (4.16V/cell).

Are these units already modified with the USB programmer?  If not is it just soldering the programmer and using the software? Or is there additional hardware changes


Sent from my iPhone using Tapatalk

I can set up blocks for 116 volt 31 amp +2 powerful diode (need a series connection)! Or do you itself setup?

Im in Florida, USA.  Thanks for picture.  Do you know of anyone using these PSU/chargers onboard a vehicle?  I'm a little concerned with vibration tolerance. 

This would be a great option for a trackside quick charger

The parameters your battery?