ElectricMotorcycleForum.com

Videos sharing the sounds of everyone's drivetrain would be a great tool to compare.

I'm about to turn over 500 miles and my.bike has gotten MUCH louder. It definitely whines under any throttle.

I have checked tension, I'm at about 40.

Going to double check that when I get home from today's ride.

https://photos.app.goo.gl/ygUofMgNXtLtG3J3A

So I adjusted my belt today. Was at about 55 and I brought it down to 35.

I've noticed my ride getting louder, and I thought .maybe the tension was increasing on the belt or something.

Well. Now I think it's my motor bearings starting to go, or are already gone.

Thoughts?

I'm making Y cables. I have tools and skills to properly crimp. One of our members has already received one, and I'm sure would vouch for me.

$125 shipped anywhere in the U.S.

I accept Paypal, cash app, crypto, whatever.

They are made to order, identical in functionality to the standard Y cable Zero sells for $250.

They will be appx 18" tip to tip, unless you need a different length.

Shoot me a PM and I'll get on your way.

Correct. I was under the impression that for a few years now Zero has done an "a/b" type firmware. Having enough memory to fully store and checksum the pending update and backing out of the flash goes wrong.

If you're going to put them in the tank area and lose the storage, might I suggest just getting the Charge Tank by zero?

I'd also only run 2, because the 3rd means a second J connector.

You generally can't run all 3 from one J 1772. You can do all 3 from a Tesla destination charger with a Tesla tap, but otherwise you'll have to find a double J.

So just run 2. And put them in some side luggage.

That's my take.

But yes you could MAYBE stuff 3 in the tank area. The fans on the TC are different than how DigiNow configured them - so that could pose an issue.

Basically after all that customizing you might as well just have done an OEM charge tank.

I ended up with DigiNow because I am going to run them in a belly pan which keeps the tank area untouched - and I can then either get the power tank or just keep using it for storage.

I helped do a group buy on a handful of programmed units.

I plan to help get more, but they won't be available until July apparently.

But yes - these work very well, need to be programmed, and plug into the aux port with an Anderson SBX75BRN connector.

Just a heads up, I spoke with Sayyed - he does not have many of these units available.

StableOfZeros is planning to do a local pickup of the units, to avoid shipping them to me, and then shipping them to users.

One of them is spoken for by Joe Johnson from the FB Zero group.

StableOfZeros has claimed 2 I believe, which unfortunately only leaves ONE more at this time.

I'll work with StableOfZeros to PM people in order that they responded to this thread, and we can work on getting more units at a discount from Sayyed. The next batch is a month out.