ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: NervEasy on March 11, 2020, 12:43:52 AM

Title: Denali SoundbBomb Mini Location
Post by: NervEasy on March 11, 2020, 12:43:52 AM

I just mounted a Denali Soundbomb mini. Not sure about the placement though. Is there anyone that also installed this horn and has a better placement?
I removed the stock bracket as the new horn was a bit to big for that. I think it clears a full compression of the forks but this is hard to check. I cannot compress the forks until they bottom out no matter how hard I jump up and down on them (stationary).

(https://i.imgur.com/XUFibNN.jpg)

(https://i.imgur.com/5fur0g0.jpg)

(https://i.imgur.com/EUgnx1I.jpg)

Title: Re: Denali SoundbBomb Mini Location
Post by: PL3 on March 11, 2020, 02:48:46 AM

That worked fine on my 16S and my 19 SR

Title: Re: Denali SoundbBomb Mini Location
Post by: NervEasy on March 11, 2020, 02:49:23 AM

ok, same spot?

Title: Re: Denali SoundbBomb Mini Location
Post by: Starpower on March 11, 2020, 10:50:47 PM

Look up your fork travel spec and measure clearances. It is probably ok, it also looks like the bracket can be bent back and up a tad if needed (2 45 degree bends).

Title: Re: Denali SoundbBomb Mini Location
Post by: alko on March 12, 2020, 05:36:33 AM

Lucky you! I wish I can fit that on my DSR, but I'm afraid there's no room.