ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: daniels1216 on September 16, 2019, 11:01:26 AM
-
Has anyone had this problem? I noticed a vibration which was different than the smooth ride I’m used to. Some miles later I stopped to check it and the back of the belt guard near the rear sprocket was rubbing the chain and had caused minor deformation on the belt. The bolt on the guard toward the rear sprocket is fastened all the way in. I’m thinking of adding a small washer somewhere on the guard bolt to pull it off the belt.
-
Yep---My SR/F had the same problem. Although it wasn't quite touching the belt, the rear of the guard was only a millimeter away. Two small washers placed between the guard and the mount on the swingarm straightened it out completely. Exactly where you are looking at and the resolution you came up with will make the problem go away.
-
I found the culprit of the motorcycles problems to be a piece of asphalt lodged in the rear sprocket. It caused the belt to bulge in that area. Good to say all fixed.