ElectricMotorcycleForum.com

Makes And Models => Energica => Topic started by: DonTom on August 19, 2019, 05:14:07 AM

Title: Cruise Control question
Post by: DonTom on August 19, 2019, 05:14:07 AM

I do not have my SS9 Owner's Manual here in Reno. I managed to get the cruise control to work on the way here, but I am not sure how or what I did to finally make it work. And when I did get it to work, I could not find an "Acel" and "coast" function.

Can somebody here please explain how to use it, so I can use the cruise control properly on the way back?

-Don-  Reno, NV

Title: Re: Cruise Control question
Post by: Kradblatt on August 19, 2019, 01:28:44 PM

It's easy to use

- Hold button with tacho-symbol to set the speed for 3 seconds.
- setted speed unlocks if you use the button again or one of the break levers
- accelerate just turn the throttle and press "set" button
- acc- and decelerate works also by holding "set" button an press "mode" button (R + speed / L - speed)

Title: Re: Cruise Control question
Post by: DonTom on August 20, 2019, 01:27:58 AM

Quote from: Kradblatt on August 19, 2019, 01:28:44 PM

It's easy to use

- Hold button with tacho-symbol to set the speed for 3 seconds.
- setted speed unlocks if you use the button again or one of the break levers
- accelerate just turn the throttle and press "set" button
- acc- and decelerate works also by holding "set" button an press "mode" button (R + speed / L - speed)

Thanks for the info. I just tried it and it works great!

-Don-  Cold Springs Valley, NV