ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: PL3 on December 09, 2018, 05:15:24 AM

Title: Vanity Plates
Post by: PL3 on December 09, 2018, 05:15:24 AM

I've seen "kik-gas", any others?

Title: Re: Vanity Plates
Post by: heroto on December 09, 2018, 08:16:47 AM

nogas

Title: Re: Vanity Plates
Post by: KrazyEd on December 10, 2018, 01:03:44 PM

On my SR I have YBYGAS. My FX has GASSUX
My Volt has GOGREEN
Not Electric but my Grand National has YGETAV8

Title: Re: Vanity Plates
Post by: togo on December 11, 2018, 04:53:43 AM

I had BADZERO on my 2011 S.   Editorial comment.  It was
reliable starting and running, but I couldn't get it to do the
35 miles I needed and I had to push it off the Bay Bridge once.

I've been happy with my 2014 SR, and haven't bothered
to transfer the plates, they are still on my shelf.

I've seen UBUYGAS (Ben Rich?) and I think ElectricTerry's
Florida plates said HAHAOIL, or I might have that backwards.

Title: Re: Vanity Plates
Post by: Evilthor on January 05, 2019, 01:17:28 AM

ZZZAP

Title: Re: Vanity Plates
Post by: NEW2elec on January 05, 2019, 01:55:41 AM

I'll post this again although there was a "custom plate" thread already.
I'm too cheap for custom plates so here ya go.
ZIPPY
SHOKN
SHHHH
NOGAS
CHARG
PLUGN
WATUP
TECHE
AIR4U
ME1ST
LIION
AMPUP
DC/AC
ZEUS1
BYYYE
OHMMS

Title: Re: Vanity Plates
Post by: syncsynchalt on January 06, 2019, 07:28:37 AM

Funny you should ask, I just sent away for mine.  In Colorado we have to blindly submit and hope, so I went for LECTRC and CHARGE.  If I don't get those I'll try for 24OVAC (no zeros allowed), and whatever else I can think of.

My wife wanted me to get TOHERO but I figured nobody would get the "joke".

Title: Re: Vanity Plates
Post by: jm on January 11, 2019, 03:06:50 AM

e(lectcric) rider

Title: Re: Vanity Plates
Post by: dukecola on January 11, 2019, 08:52:08 AM

Mine is simply, ZERO

Title: Re: Vanity Plates
Post by: togo on January 17, 2019, 01:17:07 AM

> 24OVAC

and of course:

116VDC
117VDC

or you could use a torque or horsepower spec from

https://www.zeromotorcycles.com/zero-s/#specs-zero-sr

81FTLB
60HP
18KWH