ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: dennis-NL on October 26, 2018, 06:31:31 PM

Title: Diginow 2.5: parameter settings by app
Post by: dennis-NL on October 26, 2018, 06:31:31 PM

Currently there are people allready with Diginow 2.5 in bellypan.
Please share how you are setting the charging parameters with an app and wich app.

App for dummy explanation pls.

Thx!

Title: Re: Diginow 2.5: parameter settings by app
Post by: nnelson65 on October 27, 2018, 02:08:17 AM

I'm not very computer literate, and I struggled to figure it out, but this post from Mvetter helped me to figure it out:

http://electricmotorcycleforum.com/boards/index.php?topic=8049.msg68891#msg68891

I have an iphone, so I'm using the app called "HM10 Bluetooth Serial Pro" but the process is the same.

Title: Re: Diginow 2.5: parameter settings by app
Post by: dennis-NL on October 27, 2018, 01:55:39 PM

Thx, and now for max settings.
Is it true the 3,3kW Diginows support now a setting of 4kW without problems?

Title: Re: Diginow 2.5: parameter settings by app
Post by: MVetter on October 28, 2018, 05:06:31 AM

You're most likely to actually see that behavior in the EU with stations running 247+ volts. But yeah instead of 9900 enter the value of 12000 for max watts and if it's available it'll pull an extra 20%.

Title: Re: Diginow 2.5: parameter settings by app
Post by: BrianTRice@gmail.com on October 29, 2018, 07:39:51 AM

I use the Bluetooth Serial app for iOS which has an open source basis codebase.

It exports its custom functions to JSON. I’ll try to post my functions.

Offhand, I have two settings for lower stop voltages: 111V and 112V.

I have another setting for 150W/sec ramp rate which honestly is now my default. 50W/sec is the OEM rate.

I have a 4kW/12kW total power setting in cases I think it’s viable.

I have a half-power setting just in case I want to draw 15A through two units for lower heat production or if I want to use a home outlet with them.