ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: Harlan on September 15, 2016, 12:02:48 AM
-
Hi everyone. We've received many requests over the last couple of years for a lockable storage compartment for the 2013+ Zeros and we've finally got something we think you'll like. We have available now and in stock a three piece Carbon Fiber Kit that includes a front fender, seat cowl and a lockable tank lid to replace the tank bag. You can see the pictures below or check out our website for more info at hollywoodelectrics.com (https://hollywoodelectrics.com/product-category/performance-products/).
(https://i2.wp.com/hollywoodelectrics.com/wp-content/uploads/2016/09/DSC09953.jpg?fit=1024%2C683&ssl=1)
(https://i2.wp.com/hollywoodelectrics.com/wp-content/uploads/2016/09/DSC09283.jpg?fit=1024%2C683&ssl=1)
(https://i0.wp.com/hollywoodelectrics.com/wp-content/uploads/2016/09/DSC09538.jpg?fit=1024%2C683&ssl=1)
-
Nice !! That's a great look for the whole lineup.
Ray
-
VERY nice, and I like it BUT... I'm considering a Charge Tank, which would (unfortunately) make this a moot point.
-
ever have the idea for something... and then later you see a pic of exactly what you were thinking.
This is it. This is awesome. even the finish is just right.
Only one question.... How in the world do they attach it to the plastics when they're melted plastic rivets?
-
These were really nice to see in person!
I'm putting Harlan's tank lid over my supercharger just for maintenance access, but am going to reinforce it a bit with some firm backing. The mount is designed to fit easily into the bin container and locks with the helmet/bin lock, so I'll figure out the rear attachment for that.
I'll probably just buy a fresh set of power tank sport plastics just to have a fresh install.
Although, maybe I should just use the original tank bin and carve out most of it; that'd do for a first version.
-
I saw this kit at the Zero 10th Anniversary Party, and its really nice.
-
Does the tank cover keep the contents dry in wet weather?
-
That is gorgeous, but I'm with JaimeC. It's not compatible with mounting the Diginow in the tank location, so I can't do it.
When I had my bike wrapped, I had him wrap some of the cheap plastic-looking pieces (rear fender, battery box side covers, even the "reflectors" on the Givi trunk) with a carbon fiber wrap, and it really spruced up the bike. Unfortunately it's just a cheap vinyl wrap and it's not all that durable. I'd pay a fair buck for some real carbon fiber pieces that will look as good as this tank does indefinitely. It's hard to overstate how much those cheap plastic parts drag down the appearance of the bike.
-
Does the tank cover keep the contents dry in wet weather?
When I asked Hollywood Electrics at the Zero event they said it was water tight.
After looking at it I think it would be fine in rain but I wouldn't point a power washer at it with stuff I didn't want to get wet inside.
Sent from my Nexus 6P using Tapatalk
-
Thanks for all the positive replies.
Only one question.... How in the world do they attach it to the plastics when they're melted plastic rivets?
The tank cover attaches easily in only a few minutes without even having to remove the tank from the bike. You simply drill two small holes at the rear of the tank and use a couple of self tapping screws, or rivets if you prefer.
Does the tank cover keep the contents dry in wet weather?
The tank cover is not water tight but it fits to the tank perfectly to minimize water penetration. On the bike you see here in the pics, we've upholstered the tank bag holder for a better seal but alternatively you can use thin piece of weather stripping, or a rubber bulb seal. Its really up to the installer to decide.
That is gorgeous, but I'm with JaimeC. It's not compatible with mounting the Diginow in the tank location, so I can't do it.
When I had my bike wrapped, I had him wrap some of the cheap plastic-looking pieces (rear fender, battery box side covers, even the "reflectors" on the Givi trunk) with a carbon fiber wrap, and it really spruced up the bike. Unfortunately it's just a cheap vinyl wrap and it's not all that durable. I'd pay a fair buck for some real carbon fiber pieces that will look as good as this tank does indefinitely. It's hard to overstate how much those cheap plastic parts drag down the appearance of the bike.
Even if the tank cover is not for you, the carbon fender and seat cowl really add a lot to the look of the bike.
-
These were really nice to see in person!
I'm putting Harlan's tank lid over my supercharger just for maintenance access, but am going to reinforce it a bit with some firm backing. The mount is designed to fit easily into the bin container and locks with the helmet/bin lock, so I'll figure out the rear attachment for that.
I'll probably just buy a fresh set of power tank sport plastics just to have a fresh install.
Although, maybe I should just use the original tank bin and carve out most of it; that'd do for a first version.
Thanks Brian! I think the original tank with the bag holder will work great if you just trim it neatly . You can use some edge trim from the auto parts store to cleanup the cut edge if you are concerned about the looks.
-
Thanks, Harlan.
For the watertightness concern, you might line the underside with a gasket or rubbery layer. I'm considering it.
-
I just realized this bike also has my favorite grips on it. lol. Renthal G148
-
Any forum member discounts?!
-
Wow. Nice. That looks really good.
-
Ordering mine now. Harlan says it is easy to install. Anyone do it yet?
-
It was cake to install. Even for me.
-
looks great!
-
Unless I'm missing something, I'll have to phone in the order? I don't see a way to order from the website...?
-
Unless I'm missing something, I'll have to phone in the order? I don't see a way to order from the website...?
Yes, they're an LA dealer not yet fully running an online store.
-
I wonder if the price is a bit high due to materials (carbon fiber). I would settle for ABS or something similar, as long as it's cheaper :D
-
Well, here we have it again... Harlan and his team leading the charge. Thanks, Harlan.
-
I wonder if the price is a bit high due to materials (carbon fiber). I would settle for ABS or something similar, as long as it's cheaper :D
The price is definitely about the material and the development cost; carbon fiber is not cheap to work with. Maybe an ABS plastic version can be made now that there are molds to start with?
-
I assume the carbon front fender cannot be used in place of the dirt fender and fork guards on a DSR?
-
I assume the carbon front fender cannot be used in place of the dirt fender and fork guards on a DSR?
It's just a trace/cover for the sport fender. The curvature won't even match the 19" DS/R wheel.
-
It's just a trace/cover for the sport fender. The curvature won't even match the 19" DS/R wheel.
Ahhh, got it. I thought it completely replaced the stock S/SR fender. I'm interested in a lower front fender for my DSR, similar to what the Ducati Scrambler comes with, hence the question.
-
Hey guys. Thanks for all the interest!
The front fender is a full replacement. The carbon fender actually weighs less than half of the original plastic fender.
Unfortunately it will not work with the DS models, however it does fit the FXS nicely.
Sent from my SAMSUNG-SM-G920A using Tapatalk
-
Hey guys. Thanks for all the interest!
The front fender is a full replacement. The carbon fender actually weighs less than half of the original plastic fender.
Unfortunately it will not work with the DS models, however it does fit the FXS nicely.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Awesome Harlan! All the FXS owners that want a little less weight on the front to be able to wheelie easier I'm sure have this on their shopping list ;)
-
Ha! Yeah. I mention it not so much for the weight savings but as a testament to the quality of the carbon work. It is very nice.
Sent from my SAMSUNG-SM-G920A using Tapatalk
-
I'm really interested in getting the lockable tank storage when I get my SR. I don't like the look of the tank bag, I think it looks kind of cheap. I was wondering though if it will ever come in other colors besides the carbon fiber? I would like mine to be just plain black. I don't want to deck my whole bike out in carbon fiber, and just having the tank storage that color will not appeal to me.
-
I'm really interested in getting the lockable tank storage when I get my SR. I don't like the look of the tank bag, I think it looks kind of cheap. I was wondering though if it will ever come in other colors besides the carbon fiber? I would like mine to be just plain black. I don't want to deck my whole bike out in carbon fiber, and just having the tank storage that color will not appeal to me.
It can be any color you want from the local hardware store/paint shop! Just paint it before you put it on.
-
I decided not to bother with the Charge Tank (if I'm going to take a long trip I have two ICE bikes from which to choose) so I just placed my order for the tank cover. Photos once I have it installed!
-
Ta-da!!
(https://scontent-lga3-1.xx.fbcdn.net/v/t1.0-9/15036462_10209239582919946_5595724726770102894_n.jpg?oh=b2fe8c45e57c6dddc174956dd987c87d&oe=589A6BCC)
-
Looks great :)
Does putting '17 body plastics on a '16 bike also include the new locking compartments?
-
Looks great :)
Does putting '17 body plastics on a '16 bike also include the new locking compartments?
Yes, if you buy the tank from a 2017 bike it will fit on a 2013-2016 bike and you will get the locking tank....although....if you buy a 2017 bike the key for the tank is the same as the key for the ignition. I guess you would have two different keys if you just bought a 2017 tank and put it on an older bike. If you really wanted the key to be the same I suppose you could probably buy a new ignition switch at the same time as the new tank. Or maybe they can sell you a tank that works with the key you already have?
-
Looks great :)
Does putting '17 body plastics on a '16 bike also include the new locking compartments?
Yes, if you buy the tank from a 2017 bike it will fit on a 2013-2016 bike and you will get the locking tank....although....if you buy a 2017 bike the key for the tank is the same as the key for the ignition. I guess you would have two different keys if you just bought a 2017 tank and put it on an older bike. If you really wanted the key to be the same I suppose you could probably buy a new ignition switch at the same time as the new tank. Or maybe they can sell you a tank that works with the key you already have?
It looks like the new tank lid takes a different lock, but if it's the same product line, then the keying can probably be transferred if you take the existing helmet lock apart (guessing from this howto video for helmet locks: https://www.youtube.com/watch?v=XmszrJxR0LM (https://www.youtube.com/watch?v=XmszrJxR0LM)).
-
It looks like the new tank lid takes a different lock, but if it's the same product line, then the keying can probably be transferred if you take the existing helmet lock apart (guessing from this howto video for helmet locks: https://www.youtube.com/watch?v=XmszrJxR0LM (https://www.youtube.com/watch?v=XmszrJxR0LM)).
The lock itself might be different but it definitely uses the same key as the ignition (as does the monolith storage if you get a S/DS6.5). Since they take the same key type theoretically they should be able to set the tank lock to accept the key you already have for the ignition. I was at a dealer today that has a 2017 Zero S ZF13 and checked it out. I wish you didn't have to use the key every time to open it but unfortunately if you leave it unlocked the lid pops open (spring loaded). Also, it comes with a little cable that you can use to lock your helmet to the bike. There are little posts under the tank storage lid that you secure the cable to and then shutting the lid of the tank keeps the little cable tethered to the bike....kinda cool 8)
-
It wont be a problem for a good locksmith to rekey it to match your existing ignition key.
-
Mr. Dude beat me to it. Just have the tank lock tumbler repined to match your bikes key.
-
Added carbon fiber hood latch and springs to the Hollywood Electrics tank cover. Its now functional and doesn't lift while riding....
-
Nice work! How was it to plan and build?
-
I searched online for various latches and came across the carbon fiber hood latch, and decided to use L brackets to mount it. I didnt measure anything just eyeballed it. I thought of the springs to hold the cover down after magnets and velcro didnt work. I like the way it is now, and I may have some room left in the tank after I install diginow eventually.