ElectricMotorcycleForum.com

Marketplace => Buy Sell Trade => Topic started by: BennyXU on September 14, 2016, 05:30:08 PM

Title: Looking for IXXAT interface to program with the Zero2013 SEVCON motor controller
Post by: BennyXU on September 14, 2016, 05:30:08 PM
Hello,

i`m looking for a IXXAT interface V1.5/V1.6 to program my Controller from a XU/FX 2013.
Did someone have one and want to sell it?

You can contact me fia Mail: schoen.ben@web.de

Kind regards,
Benny
Title: Re: Looking for IXXAT interface to program with the Zero2013 SEVCON motor controller
Post by: frodus on September 14, 2016, 09:01:41 PM
New software requires key from Sevcon, if you use the older software (floating around online) you can't use the new dongle.

So basically, if you use old software and the older IXXAT dongle, it'll work.

They come up from time to time online, and you should snatch them up.
Here's 2 on ebay:
http://www.ebay.com/itm/IXXAT-USB-to-CAN-Compact-V1-6-/152234161164?hash=item2371dcf40c:g:gSUAAOSwFdtX0TXX (http://www.ebay.com/itm/IXXAT-USB-to-CAN-Compact-V1-6-/152234161164?hash=item2371dcf40c:g:gSUAAOSwFdtX0TXX)
http://www.ebay.com/itm/IXXAT-USB-to-CAN-Compact-V1-6-/152234157536?hash=item2371dce5e0:g:z~oAAOSwdIFX0TQF (http://www.ebay.com/itm/IXXAT-USB-to-CAN-Compact-V1-6-/152234157536?hash=item2371dce5e0:g:z~oAAOSwdIFX0TQF)
Title: Re: Looking for IXXAT interface to program with the Zero2013 SEVCON motor controller
Post by: MrDude_1 on September 14, 2016, 09:03:54 PM
Quote from: frodus on September 14, 2016, 09:01:41 PM
New software requires key from Sevcon, if you use the older software (floating around online) you can't use the new dongle.

So basically, if you use old software and the older IXXAT dongle, it'll work.

They come up from time to time online, and you should snatch them up.
Here's 2 on ebay:
http://www.ebay.com/itm/IXXAT-USB-to-CAN-Compact-V1-6-/152234161164?hash=item2371dcf40c:g:gSUAAOSwFdtX0TXX (http://www.ebay.com/itm/IXXAT-USB-to-CAN-Compact-V1-6-/152234161164?hash=item2371dcf40c:g:gSUAAOSwFdtX0TXX)
http://www.ebay.com/itm/IXXAT-USB-to-CAN-Compact-V1-6-/152234157536?hash=item2371dce5e0:g:z~oAAOSwdIFX0TQF (http://www.ebay.com/itm/IXXAT-USB-to-CAN-Compact-V1-6-/152234157536?hash=item2371dce5e0:g:z~oAAOSwdIFX0TQF)

Is the new software free to download, because its key protected?
Title: Re: Looking for IXXAT interface to program with the Zero2013 SEVCON motor controller
Post by: frodus on September 14, 2016, 09:33:29 PM
new and old technically are distributed by Sevcon, and are for-purchase. But if you look hard enough, you can find the old software. I got my copy from Sevcon, as I work with them on and off. I cannot get copies and distribute. Old software doesn't require a key.

New software doesn't do you any good unless you can get it with a key from Sevcon. old IXXAT dongle works with old and new software, they're just hard to find.
Title: Re: Looking for IXXAT interface to program with the Zero2013 SEVCON motor controller
Post by: BennyXU on September 15, 2016, 12:44:50 AM
Thanks for all Informations.
I dont find the softwear for the Sevcon.
On every page the same. File not found or no download avalible :(.
Have someone a link for the Download?
or an Installfile?

Many many Thanks

addendum: I have it  8)