ElectricMotorcycleForum.com

Marketplace => Buy Sell Trade => Topic started by: frodus on July 09, 2016, 03:55:29 AM

Title: FS: DeltaQ 72V chargers
Post by: frodus on July 09, 2016, 03:55:29 AM

[IMPORTANT} I No longer have used chargers left, but I can provide new chargers of any current offering of DeltaQ chargers (48/72/96V) if needed.


[Used chargers have been SOLD]

I've got a few used DeltaQ 72V chargers that were removed from working EV's and wanted to see if other DIY EV guys wanted them. The white enable wire has been permanently wired to B- so the charger is always enabled.

72VDC
1000W
12A max
912-7200 (http://"http://www.fullriverbattery.com/product/chargers/912-7200")

Programmed with Lithium Profiles below:
#67: (72V 73.8V)
#128: (72V 82.044V)
#211: (72V 83.16V)
#163: (72V 85.5V)
#53: (72V 87.588V)
#123: (72V 89.1V)
#164: (72V 91.188V)
#135:  (72V 93.384V)
#177: (72V 98.532V)


Asking $250 each plus shipping (About $20 in the lower 48). These were programmed as of 7/17/2016 with all of the algorithms above.

Title: Re: FS: DeltaQ 72V chargers
Post by: Doctorbass on July 09, 2016, 09:23:35 AM

Hello Travis... lol.. curiously you are anouncing these 72V deltaQ and i'm right now working on mine... and i have a question related to these:

do you know exactly what kind of signal level and relative to what (gnd, neg, pos)...  the grteen and the white wires need to be enabled.. ? i just dont remember and i'm working on my 2012-2015 conversion and will replace it by some HLF-320 meanwell  but these dont have any ENABLE trigger input.. so i need to know what kind of signal is enabling these to buld the trigger circuit or relay  that will interface the HLG-320  see zeromotorcyle owner FB page for more info.

Thanks

Title: Re: FS: DeltaQ 72V chargers
Post by: frodus on July 09, 2016, 10:13:54 PM

Get the manual at Fullriverbattery.com for wiring stuff.

White to B- enables charger. Disconnect to disable.
Red is B+
Black is B-
Green is the Interlock. Green is pack voltage when you're not plugged in, and disconnected from B+ when plugged in (I think, but be the other way around). DO NOT CONNECT TO B-, you will blow the internal fuse which is a PAIN to replace.

Title: Re: FS: DeltaQ 72V chargers
Post by: Doctorbass on July 10, 2016, 11:19:46 PM

Ok thanks!

I'll figure out a way to interface the Meanwell to the Zero with the enable  and interlock function.

Doc

Title: Re: FS: DeltaQ 72V chargers
Post by: frodus on July 18, 2016, 09:24:01 PM

Updated info in ad

Title: Re: FS: DeltaQ 72V chargers
Post by: frodus on August 31, 2016, 01:05:35 AM

Used chargers sold, new ones available if needed

Title: Re: FS: DeltaQ 72V chargers
Post by: cec on September 01, 2016, 05:21:38 AM

I need a charger for a 2011 zero x.  I believe that is 48v.  How much and will it have the right plug?

Title: Re: FS: DeltaQ 72V chargers
Post by: frodus on September 01, 2016, 09:33:08 PM

I sell stock chargers, so any connectors that may be specific would need to be put on by the end user.

email me for pricing, info in signature.