ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: FirstZeroFinland on May 15, 2016, 03:00:42 PM

Title: FX 2014 high voltage fuses not where manual says!
Post by: FirstZeroFinland on May 15, 2016, 03:00:42 PM

12v system went dark. High voltage fuses are not where manual says, and I have only found one sand filled fuse. Someone had similar problem and had photos from zero but didnt mind telling it to others! >:(
 I have contacted zero but it takes too long. Someone have any info?

Title: Re: FX 2014 high voltage fuses not where manual says!
Post by: evtricity on May 15, 2016, 07:29:34 PM

Try looking at the 2015 FX manual.

The 2015 SR/S/DS manual has the correct configuration for the 2014 SR/S/DS high voltage fuses while the 2014 S/SR/DS manual is wrong for 2014 high voltage fuses.

Title: Re: FX 2014 high voltage fuses not where manual says!
Post by: phildaniels on May 18, 2016, 10:43:06 PM

Hi there, I have a 2015FX and the 12V system only works when temp is above 70F in the garage.  Then, upon startup, all 12V items (headlights, indicator, horn and ABS) all work fine.  But, if the nighttime temp goes cold, and the garage temp is 60F or less, then the 12V stuff doesn't turn on.  Something is intermittent.  Any ideas, from your own experience with the 12V? 

Thanks,
Phil
New Hampshire

Title: Re: FX 2014 high voltage fuses not where manual says!
Post by: FirstZeroFinland on May 19, 2016, 12:13:38 PM

Thanks evtricity, it was in 2015 manual!
 It is little hard to find under the cover.
   phildaniels , I would change the fuse first. Just a tought to check the spring under the fuse, mayby it is just a little weak and extract in cold weather? 😄

Title: Re: FX 2014 high voltage fuses not where manual says!
Post by: ammonsh on June 23, 2016, 11:28:25 PM

I was changing my 250v 4 amp high voltage fuse and lost the cap.  Does anyone know where I can get a new one?