ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2012 and older => Topic started by: centra12 on April 24, 2016, 04:02:59 PM

Title: BMS-fuel gauge
Post by: centra12 on April 24, 2016, 04:02:59 PM

Hello

For some time, the fuel gauge is in the display of my Zero DS always 100% even though the battery is discharged
 
BMS I now read out once and the value "Fuel Gauge" always remains at 100% of the value "Pack Percent Remaining" varies quite normal and is OK
Error codes are not output from the BMS !!!
Already have a BMS reset with the two buttons on the front of the battery performed without success!
When the rest of the BMS must be done?? When the battery is full??
What could I do or check??

Title: Re: BMS-fuel gauge
Post by: centra12 on April 25, 2016, 10:19:31 PM

Hello

what is the price of the BMS controller in the USA

Will probably a neuse controller need even though the battery was reviewed in 2015 :'(

Title: Re: BMS-fuel gauge
Post by: centra12 on May 01, 2016, 11:14:33 PM

What should I do now???? :'(


Hi Michael. These are presently out of stock. I'm told it will be several months before they are back in stock.
Harlan Flagg
Hollywood Electrics
store 323.654.8271
cell  818.282.6767
harlan@hollywoodelectrics.com

Title: Re: BMS-fuel gauge
Post by: Harlan on May 01, 2016, 11:30:39 PM

Hi Michael. In my experience, the problem is not the bms. If you can have your local dealer reflash your mbb, this should resolve the issue.

Sent from my SAMSUNG-SM-G920A using Tapatalk

Title: Re: BMS-fuel gauge
Post by: centra12 on May 01, 2016, 11:37:52 PM

Hello

Thanks for the answer

But I need even if the error is resolved, a new BMS !!!!
My BMS is still the old version without sealing and has already oxidations on !!!!!

Would also buy a used