ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: MorbidBBQ on April 22, 2016, 08:05:49 AM
-
The local dealership (2 hours away), offered to install my top box rack kit for 20$. (on my 2013 Zero S)
I'm thinking, for $20; it must just bolt on!
I've installed a side rack kit for my Yamaha Fz6, and would have gladly paid $20 instead of doing it myself.
I've looked for the installation manual, but can't find it.
So is it a super easy install?
http://www.zeromotorcycles.com/shop/index.php?main_page=product_info&cPath=15_7&products_id=187&zenid=m269ou6bnicq5eu9iifkjn9aj6 (http://www.zeromotorcycles.com/shop/index.php?main_page=product_info&cPath=15_7&products_id=187&zenid=m269ou6bnicq5eu9iifkjn9aj6)
-
Yes, It's really easy to install, two bolts. The rack comes with longer bolts which you likely will need. If I remember right newer bikes can use the existing seat bolts to hold the top rack in place.
Basically, the seat bolts is where the rack mounts.
Sent from my Nexus 7 using Tapatalk
-
I fitted my top box rack myself to my 2015 SR. Its just a matter of undoing the 2 bolts that hold on the seat and bolting 2 small bolts to the front mount of the rack then put the seat back on (seat bolts go through the rack). The problem is the seat bolts are a 6 legged star (like a philips head screw but with 6 slots not 4). I had to go buy a set of them to get the one I needed. But the up side is if you ever need to check your fuses then you have the tool to remove the seat.
-
The name of the driver you need is "torx" quite common now and a good thing to have around
-
Correction on my last post, they are all Allen style IIRC, maybe the new bolts are torx?