ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: Lecram on April 14, 2016, 05:02:38 PM

Title: Speed adjustment after high torque option 2015 DS
Post by: Lecram on April 14, 2016, 05:02:38 PM

I have mounted the high torque gear on my 2015 DS. That works great, but the shown speed is about 20% higher than the real speed. I have heard that this can be adjusted in the bike's software, but the dealer is vague about this.

My question is: can anyone confirm that it is possible to adjust the settings in the software so that the shown speed is correct after changing the gear?

Title: Re: Speed adjustment after high torque option 2015 DS
Post by: evtricity on April 14, 2016, 05:07:01 PM

The adjustment to correct your speedo needs to be made in the Main Bike Board.

A dealer should have the appropriate cable which connects to the OBDII port.

Details to make your own cable are outlined at http://electricmotorcycleforum.com/boards/index.php?topic=4296.msg27353#msg27353 (http://electricmotorcycleforum.com/boards/index.php?topic=4296.msg27353#msg27353)

Title: Re: Speed adjustment after high torque option 2015 DS
Post by: Lecram on April 14, 2016, 05:20:17 PM

That's cool! Thanks for your fast answer.

If I make this cable, is it possible to do it myself? What software do I need then?

Title: Re: Speed adjustment after high torque option 2015 DS
Post by: evtricity on April 14, 2016, 05:36:18 PM

You need a terminal program like putty (which is free)