ElectricMotorcycleForum.com

Tech => Tech Help => Topic started by: kcsimcoe on August 20, 2009, 10:56:38 AM

Title: review of my schematic please
Post by: kcsimcoe on August 20, 2009, 10:56:38 AM

can someone take a look at this and tell me if anything looks wrong? I'm not grounding anything to the chassis, using 2 ga welding cable, am wondering about any additional resistors or diodes or fuses I would need.  I was told the EV200 contactor has a built in diode, does anyone know of that? thanks

chris
(http://img177.imageshack.us/img177/1419/wiringschematic.jpg)

Title: Re: review of my schematic please
Post by: NewAge on August 20, 2009, 12:01:37 PM

http://alltraxinc.com/files/Doc100-045-A_DWG-AXE-No-Reverse-wire-dia.pdf (http://alltraxinc.com/files/Doc100-045-A_DWG-AXE-No-Reverse-wire-dia.pdf)

I ran both diodes and the big resistor with my setup, and I ran my 2 converters in a separate loop.

Title: Re: review of my schematic please
Post by: frodus on August 20, 2009, 12:39:01 PM

no diode needed for the EV200 contactor, its built in.

the other is a good idea to have in there.

see my post on elmoto as well:
http://www.elmoto.net/showthread.php?t=1039 (http://www.elmoto.net/showthread.php?t=1039)