ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: rayivers on June 25, 2015, 07:38:04 AM
-
I've found 43mm alternative forks that will fit the '14 FX triple clamps (and possibly the '13 and '15 FX too, but I've no measurements for those) - the '03 to '16 KTM 85 SX forks. Here are the specs (the KTM travel and OAL may vary slightly between years):
FX KTM
OAL 812mm 835mm
Top TC 49mm 49mm
Btm TC 53mm 53mm
Travel 230mm 270mm
There's plenty of upward fork-tube adjustment available in the Zero TC's and all the upper tubes for setting front ride height.
Ray
-
The 13 14 and 15 are all different triple clamps
-
The 13 14 and 15 are all different triple clamps
Any measurements?
Ray
-
do you have the same for the zero S
-
Guess you're already aware, but the zero fx weighs about tiwce as much as the ktm 85
-
My 2.8 FX weighs 228 lbs, the 2015 KTM 85SX about 150. The KTM 43mm WP fork is plenty strong, and with proper springs and valving would work fine even for a 5.7 FX and 250 lb. rider, for non-competition use. Earlier versions of these forks were used on the KTM 520EXC, a 250 lb. motorcycle.
Ray
-
Isn't that the fork KTM use for their freedom e electric motorcycle?
If it is, than it should handle the fx with ease.
Good find.
-
I didn't realize the Freeride e has 43mm WP forks - that's a good find too, thanks! That bike weighs 242 lbs - hmm, I wonder what spring rate they use... :) Actually, the whole front end looks pretty good to me; 21" wheel, 4-piston brake, etc.
Ray