ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2012 and older => Topic started by: motorfiets on June 18, 2014, 08:04:29 AM
-
I recently swapped out the rear sprocket on my zero from a 71T down to a 51T. I am now able to ride at around 55 - 56 MPH max in mode II. Being that I rarely see that kind of speed in town, I have considered going back to the 71T and only be able to get 47-48 MPH max.
Question is... with respect to my range... would I get longer range on the 51T sprocket because I was "spinning" the motor less RPM's?
-
pretty sure the main losses in range will be from pushing air harder at top speed (for something so light, air sure uses up some energy to move...), and increasing the amount of torque you have to produce when you start from a stop. I think the difference in energy from the RPM's is actually very negligible.
I'm totally new though and could be way off, so smart guys... how close am I? :)
-
and increasing the amount of torque you have to produce when you start from a stop.
Are you saying having more torque (i.e. - 71T sprocket) will drain the battery quicker than say a 51T?
-
and increasing the amount of torque you have to produce when you start from a stop.
Are you saying having more torque (i.e. - 71T sprocket) will drain the battery quicker than say a 51T?
only when accelerating from what's been explained to me, but I've never had the chance to sit down and pick the brain of an EV guru... I looked into converting my jeep, and being so short, it would be a ton easier to make it direct drive, but the limitation has been explained to me as "more weight = more torque required to overcome inertia = power consumed with less efficiency"...
still trying to get my brain wrapped around wattage being a replacement for HP... I understand the "volume vs flow" for volts and watts/amps, but when you try to bring it over and equate it with an EV and torque/HP, it starts looking like apples/oranges to me :)
The "pushing air" thing is my own observation. It only took me about a week to realize that air becomes a really big deal at freeway speeds, and going through vetter's webpage recently solidified that pretty well for me.
-
Hi guy
Why would you change the rear sproket? I have 4 front sprockets 13t,14t,15t and 16t. I find very litltle change in range. Like said seed increase is offset by drag and higher torques. The rear sprocket is the easyest to change and only have to add one link set between 13 and 16t sprockets.
Cheers Jerry