ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: Moidore on April 07, 2014, 02:37:24 PM
-
Is that actually possible on the 2014 SR? Or is the throttle electronically controlled so you can't actually pop a wheelie or do a burn out? - not that I condone this :P
-
All 2013+ Zero's will burnout I believe. Apparently the crap chinese tyres pump out a hell of a lot of smoke too.
Ive already asked the wheelie question, SR is too front heavy to wheelie. The FX is a hooligan tool though and wheelies well.
-
Also the torque is limited at low speed, you would need to wheel at high speed.
-
And the weight distribution is so low on the SR (compared to many sports bikes) that it makes less prone to lift off at hard acceleration.
This is a good thing that most other bike manufacturers struggle with due to their higher center of gravity.
-
And the weight distribution is so low on the SR (compared to many sports bikes) that it makes less prone to lift off at hard acceleration.
This is a good thing that most other bike manufacturers struggle with due to their higher center of gravity.
That's actually good news for me. With that much torque, I've been a tad worried about accidentally lifting the front wheel off when accelerating too hard, especially in the first few days of getting used to the feel of the bike.
-
Is that actually possible on the 2014 SR? Or is the throttle electronically controlled so you can't actually pop a wheelie or do a burn out? - not that I condone this :P
Yes.
(http://images.motorcycle-usa.com/photogallerys/2013ZeroSMotorcycleReview9.jpg)
-
Awesome picture!
-
Not so "Zero emission"