ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2012 and older => Topic started by: SPD on September 27, 2011, 08:13:48 AM
-
I was not happy with the feel of the stock Zero Ds. Spoke to Zero. Programming of any kind voids the warranty. Changing sprockets does not.
Just put a 61 tooth sprocket on the rear of a 2010 DS and love the performance. It feels much more solid with better pickup and a new mid range boost that wasn't there before. I left the front sprocket alone.
Top speed on 2010 Zero DS with only rear sprocket upgrade (61T) is now 60mph. That is fine for me and the motorcycle performs much better now, in my opinion. No one seemed to be able to list the top speed with this change out, so posting it here for others. Not going to touch the front. I want 55mph with a buffer and 60mph is a good top speed for my needs.
On a side note the rear chain guide it came with does not clear the chain. I did not change the front to a 13 that was in the kit, but when I spoke to Zero they said it was not necessary. Going to give them a call and ask for the right chain guard bracket.
-
Have you noticed any change in range with the sprocket change?
-
great information. was not aware of warranty issues ! Suprises me that tuning the curve would void warranty ? With sprockets you tune in similar way - maybe not as freely.... I tried the front sprocket and got a good result. Range ? did not notice a difference. Just much more fun of the line.
Based on Zero advise we have started to look at doing the rear sprocket sprocket instead - seems to be easier on the motor for some reason.
Wondering what one can do with the 2010 S as it is belt driven ....
-
Interesting. It was my understanding that the zero DS came belt driven to begin with. At least that was the info I got from their website.
I'm a 300lb rider, so I would have to drop the top speed some to accel/battery decent.
-
It was my understanding that the zero DS came belt driven to begin with.
All the 2010 come chain drive. 2011 it's an option with belt standard.
=:)
-
I just replaced the rear and front sprocket on my DS 2010.
Still not tried, but i'Mll also have to modify a bit the chain guard and also need to extende the chain. Is I still not founf the chain link that make easy the chain loop dissassembly.. will see.. anyway i have bought the chain breaker and a have a spare chain.
I think the front is a 13T now and the rear is a 61T. That ratio will be perfoct for offroad use!
I will also modify the MBB to set max current at low speed to be higher and also to disable the 108km/h limit by reprograming the MBB.
The goal is to convert my DS 2010 into a Offroad with the torque and the weight.
My DS 2011 will upgrade to S model and have more kWh battery.
Doc
-
Hi,
like what your doing, improving two older models. One for offroad and one for street use. Now I want to buy a second one to get onto this.
I just replaced the rear and front sprocket on my DS 2010.
Still not tried, but i'Mll also have to modify a bit the chain guard and also need to extende the chain. Is I still not founf the chain link that make easy the chain loop dissassembly.. will see.. anyway i have bought the chain breaker and a have a spare chain.
I think the front is a 13T now and the rear is a 61T. That ratio will be perfoct for offroad use!
I will also modify the MBB to set max current at low speed to be higher and also to disable the 108km/h limit by reprograming the MBB.
The goal is to convert my DS 2010 into a Offroad with the torque and the weight.
My DS 2011 will upgrade to S model and have more kWh battery.
Doc
-
I'm selling my 2010 DS but I will be keeping my 2012 DS to use interchangeably with my 2013 FX for different kinds of rides.
I think I put a 65 tooth sprocket on the 2010 but would have to check that.
Trikester
-
Changing the sproket is the "easy" way to improove accceleration performances on the 2010 and 2011 without to void warranty ( if still under warranty.. ??? ::) in 2013...)
The second way is to keep actual sproket size and get better performances is to play with the MBB program and modify the max current value for the differnet performances stage, just like offthegrid did. this will also improove the max speed a little bit.
I will also play with that. I just bought he FTDI usb to rs 232 interface and will play with the setup of the MBB.
Please do not attempt this if you are not familliar with these kind of programing!
Doc