ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2012 and older => Topic started by: 3025william on October 10, 2010, 03:36:07 AM

Title: Zero S controller shutdown
Post by: 3025william on October 10, 2010, 03:36:07 AM

I have a 2010 Zero S and have experienced occasional motor controller shutdowns.  This has usually occured when I have been climbing a hill at full throttle and then snap the throttle shut after cresting the hill.  The bike then will not respond to the throttle and will coast to a stop if I don't reset it by cycling the kill switch or key.  Has anybody else had a similar experience?

Title: Re: Zero S controller shutdown
Post by: picasso on October 10, 2010, 05:11:43 AM

I don't own an S/DS but it could be a few things. The BMS shutting things down because a section of the pack went to low voltage cut off. Thermal cut by the controller but this would not be just a fast reset till things cooled down.

What level of charge does this seem to happen? might help narrow down the problem. Should also feel the major parts of the bike next time this happens. If you have an IR temp gun even better.

Title: Re: Zero S controller shutdown
Post by: Harlan on October 10, 2010, 05:50:30 AM

It sounds like your controller may be having some issues.  Its an easy fix but you should notify Zero or you local sales rep and have it replaced under warranty.