ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: zian on February 23, 2025, 01:36:25 AM
-
Hi everybdy !
I'm trying to access MBB logs with an OBD-II link with Gen3 (Zero S 2024/2025).
But it always answer : "log printing not supported".
All others cmd of help are working well.
Do someone know how to do ?
with help cmd :
-- MBB Event Log Management --
elddh - Log Dump by Date dump hex. Usage: elddh [start date: MM DD YYYY HH MM SS]
eldh - Display event log contents in hex for export to .hex (need log decoder to decode)
My tests :
ZERO MBB> elddh
Enter an end time (MM DD YYYY HH MIN SEC)
02 16 2025 00 00 00 (entered)
log printing not supported
ZERO MBB> elddh 02 16 2025 00 00 00 > 02 17 2025 00 00 00
log printing not supported
ZERO MBB> eldh
******************************************************************
Current MBB time is Mon, 02/17/2025 09:46:21
VIN: PAG..., Serial: R..., Model: S_A1, MY: 2025
Board Name: MBB PDU POTTED GEN 3 STEP D1, Board PN : 40..., Board ID : 05
Firmware Name : FIRMWARE MBB GEN3 , Firmware PN : 75..., Firmware Rev :37
Build : 2024-05-28_... banka, Reset Source: Hib Wake Pin, Power-On, Supply WD, Power Val
******************************************************************
log printing not supported
Moreover, I don't arrive to access the BMS prompt : "ZERO BMS>"
I'd like to launch the "ZERO BMS> balance"
I've tried (bms login <bms> <level>) :
ZERO MBB> bms login 2 1
Logged in to BMS 2 at level none
Success
I choose <bms>=2 because "ZERO MBB> status" answers :
* * * BATTERY INFO * * *
BMS | SOC | Pack V | Current | Capacity| L cell | H temp | L temp | Cont | Elig
----+-----+----------+---------+---------+----------+--------+--------+------+------+
2 78 % 111405 mV 0 mA 137 AH 3976 mV 14 C 13 C + + +
What is level ? Do someone know how to access the prompt "ZERO BMS>" ?
Thanks in advance !