ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: Rio206 on December 23, 2024, 09:12:33 AM
-
I want to source the large ribbon in a Gen 2 Monolith pack that connects the cells of the four bricks in parallel and connects the thermistors of three of the packs to the BMS.
The ribbon was damages at the place it connects to the pins of the bms; many of the little parts that grab on to the pins of the bms were bent and broken off. It is conceivable that the ribbon could be soldered to those pins, but I would like to avoid that if possible and hope someone can help be source the part.
Does anyone know who may have a dead monolith pack that I could buy this part from? Any other options to source?
Information about the BMS it will connect to is attached, but I'm thinking all the Gen 2 monolith packs share the same pinout.
Thanks for any help solving.
-
Crickets, but had to ask. Looks like I'll be attempting the repair fixing the pins on the bms. The pack is all the way back together so a lot of stripping down ahead of me. I don't really do this fine soldering work, so I'll get help