ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: albenex on May 25, 2024, 03:08:57 PM

Title: How to bypass turn lights flasher/blinker on S MY21
Post by: albenex on May 25, 2024, 03:08:57 PM

Hello,
i know that my bike should have CF14 type flasher.
I recently bought a LED turn signals kit with an animation.
I've tried them using no resistance and also different advised resistances with different ohm but results is similar: animation is not completed and besides that, resistances get very hot.

so I've thought about bypassing CF14 flasher: if no flasher, then LED animation will complete and restart again. The only issue will be no flashing on dashboard (no issue to me).

before starting removing seat, tank etc.. i'd be sure on how to proceed to not mess up anything so i come here to ask if someone else did the same or, better, if there's any guide about it. From a brief search to Unofficial Zero Manual, there's any row about it

Title: Re: How to bypass turn lights flasher/blinker on S MY21
Post by: ESokoloff on May 25, 2024, 07:57:35 PM

Why not just swap out the stock flasher for a solid state (electronic) type?
You may have to swap the bikes flasher relay socket wires or source the oddball relay as in my case, Zero used an oddball relay pin arrangement. 


See more here…..
https://www.electricmotorcycleforum.com/boards/index.php?topic=11961.0

Title: Re: How to bypass turn lights flasher/blinker on S MY21
Post by: TheRan on May 26, 2024, 12:06:50 AM

Are you sure that the animation will actually loop when fed a continuous power source?