ElectricMotorcycleForum.com

Makes And Models => Energica => Topic started by: ACDC Biker on May 16, 2024, 08:43:08 PM

Title: non-original side or middle stand for an Energica Eva SS9 ?
Post by: ACDC Biker on May 16, 2024, 08:43:08 PM

Are there any Energica bikers who have ever fitted a 'non-original side or middle stand' to an Energica Eva SS9 (the 14kw version... without +)  ?
I've had problems with the threaded screws in the battery block before. I suspect that my side stand is slowly but surely bending. 300 kg is simply too much.
My favourite would be a non-original middle stand  ::)

Thx   ;)

Title: Re: non-original side or middle stand for an Energica Eva SS9 ?
Post by: PWM on May 17, 2024, 07:34:43 AM

Bummer...recommend fixing the original side stand mount using a Time-Sert...easy DIY task should only take an hour...kits are readily available.

Energica to this day has not figured out a means to deploy an integral center-stand that is safe and reliable...the battery serves as the only viable structure but it's positioned too far forward is my guess...

Title: Re: non-original side or middle stand for an Energica Eva SS9 ?
Post by: ACDC Biker on May 17, 2024, 10:52:25 PM

Thx  ;D  I was able to loosen it easier with the screw. The original screw is quite short. The thread goes even longer into the block, so a longer screw fits.
But, I don't like this side stand.  ???