ElectricMotorcycleForum.com
Makes And Models => Energica => Topic started by: SRL on November 02, 2023, 12:46:37 AM
-
After 5k miles my Domino throttle is getting glitchy and I need a new one. Is the standard Domino 5ohm throttle pin and wire color code compatible with the pre-Hall effect energica one? In other words can I just cut the energica connector off and solder it onto the new domino throttle. Also, is there any dealer programming required like some sort of TPS setting?
-
I confirm the unit on your bike is the same 5k Ohm unit commercially available from Domino. You will just need to adapt the connectors to match the existing 2 and 3 pin JST JWPF ones.
You might also want to take you existing throttle apart and try to repair it. Problem might be related to a chafed wire or at one of the solder connections to the pot.