ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: zito6 on June 27, 2023, 01:05:06 AM
-
Hi guys!
I have bought zero ds from 2013 without battery and bms (only cables and contractor).
It appears to be after rhe service action when they replaced the battery’s because it is written Zf 9.4 on it (2014+).
The first step was to connect another battery ~106V to main contractors and MBB power.
But nothing happens, but the display powers up after enabling the dc-dc converter
Some tips how to get further ? Which pins need to be connected to power up the MBB ?
How does the “power on” and “power on reference” work ?
Some time ago there was a CAN-BUS Zero protocol available on GitHub, but it has been delated, does somebody want to share it or any other reference connected with Zero Can Bus protocol ?