ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: dee91 on May 30, 2023, 02:56:13 PM
-
Hi
does anyone have a picture or able to take a picture showing the wiring colors that go to the fusebox or even a picture of the numbers on the top of the connector. I'm in process of rebuilding one that had the loom removed from it and not been able to figure it out as the wiring diagram that's available isn't that clear .
-
Fuses for 2020 FXS
1 blue/violett
2 blue/green
3 blue/yellow
4 blue
5 blue/black
6 brown
-
thanks it wasnt the fuse coloring i was after it was the actual wire colors that go on top. so i know which color goes to which
-
Umm, I think Bodo was giving you just that. Those are wire colors.
-
apologies was on phone and raed it as if thats the fuse colors ;D ill have a look tomorrow and hopefully that'll sort it thanks Bodo
-
Bodo thank you for that. thats sorted out the top line.
this is a bit cheeky as not sure if you can even see if but are you able to see or take a pic of the bottom row and the numbers on top of the connector. the bottom row are all the same color wire so trying to figure out the order without resorting to following the wire back to see where they join
-
Actually managed to sort it. thanks to Bodo and also zero. there technical team replied back with the info as well
-
Thank you for following up, and sharing the ZMC input, dee!
-
Ill be active on here for a bit while i rebuild. the 12v supply isnt working so no lights horns etc. seen a few posts talking about the issue either being controller, mbb board or fuse but need to read up properly and test