ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: ms_smart on April 07, 2023, 03:20:21 PM
-
Quick question to the experts in this forum: I own a SR/S Premium with chargetank (12KW charge speed). I live in Germany where we have a 3-phase electric system (220V) and bought the 10% Upgrade (Cypher Store).
If I run a test on a single phase I can see 11% higher charge speed. Currently I can't test on all 3 phases since the Battery temp is too low and SOC too high to max out the charging speed. But I have read before and after the update data from the MBB console during charging.
Before Update:
*************************************************************
* Chargers *
*************************************************************
Charger, En, OUT V, OUT A, IN V, IN A, IN HZ, CMD IN, CMD OUT, Ver, Serial, CANid, Status
3kW , 1, 102.4, 28.6, 219, 14.0, 50, 7, 28, 204, 0, 0x010, 0x0080
3kW , 0, 0.0, 0.0, 0, 0.0, 0, 7, 0, 204, 1923138, 0x011, 0x0020
6kW , 0, 0.0, 0.0, 0, 0.0, 0, 7, 0, 200, 1919058, 0x012, 0x0020
*************************************************************
ZERO MBB>
After Update:
*************************************************************
* Chargers *
*************************************************************
Charger, En, OUT V, OUT A, IN V, IN A, IN HZ, CMD IN, CMD OUT, Ver, Serial, CANid, Status
3kW , 1, 108.8, 29.9, 224, 15.3, 50, 16, 30, 206, 0, 0x010, 0x0080
3kW , 0, 0.0, 0.0, 0, 0.0, 0, 16, 0, 204, 1923138, 0x011, 0x0020
6kW , 0, 0.0, 0.0, 0, 0.0, 0, 16, 0, 200, 1919058, 0x012, 0x0020
*************************************************************
ZERO MBB>
Apparently charger 1 is now on Ver 206, but Charger 2 still on Ver 204. Does someone know if 206 is a requirement for the 10% charge speed increase? In this case I would not get the 10% increase on charger 2?
-
I believe it should be ok. The previous generation of firmware was in the 1xx region.
-
Thanks for your feedback! I can now confirm, that 204 and 206 both works with the charger upgrade. I get now 13.018 kWh charge speed on AC and 12.429 kWh on DC if charging on a public 22KW charger. This is indeed 0.6 kWh more than what I got before the upgrade.
*************************************************************
* Chargers *
*************************************************************
Charger, En, OUT V, OUT A, IN V, IN A, IN HZ, CMD IN, CMD OUT, Ver, Serial, CANid, Status
3kW , 1, 106.2, 31.0, 233, 14.8, 50, 17, 31, 206, 0, 0x010, 0x0080
3kW , 1, 106.3, 30.8, 233, 14.7, 50, 17, 31, 204, 1923138, 0x011, 0x0080
6kW , 1, 106.4, 55.1, 231, 26.6, 50, 29, 58, 200, 1919058, 0x012, 0x0080
*************************************************************
ZERO MBB>
-
Guys, about the chargers firmware, is it possible to update them without going to the dealer? can I make my self? or any procedure to update?
I already have v8 (new dashboard) SRS 2020 Premium
Thanks :)