ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: NervEasy on February 17, 2023, 04:57:38 PM

Title: Front and rear pulley DSR/X to SR/S
Post by: NervEasy on February 17, 2023, 04:57:38 PM

Hi,

Does anyone have more info if the front and rear pulleys from a DSR/X would be a straight swap on a SR/S?

Does the wider belt of A DSR/X have the same number of teeth as the SR/F and SR/S belts?

Sincerely

Title: Re: Front and rear pulley DSR/X to SR/S
Post by: TheRan on February 17, 2023, 05:04:22 PM

The DSR/X is 22/90t while the SR/S is 20/90t. The rear wheels look the same so you can probably swap the rear pulleys and the fronts should be the same, but I'd be concerned about clearance. I suppose if you've got an SR/S you can have a look and judge for yourself whether you've got an extra 5mm or whatever to either side (not only where the belt runs but also for the wider pulleys, the DSR/X does have a different swingarm).