ElectricMotorcycleForum.com

Makes And Models => Energica => Topic started by: Specter on January 21, 2023, 05:59:33 AM

Title: Where to get parts at for the bike
Post by: Specter on January 21, 2023, 05:59:33 AM
Pulled the bike into the garage today, was a real snug fit and got a tad close to the table saw and dinged one of the front flasher lights and cracked the case on  it.

where would I go to buy another one to put a new cover on it?

also with that, with things like this in mind, where would you go to get fairings etc as well for when the day comes you lay it down?

How about after market parts, like the kickstands,the specialty stands for holding the wheel up off the ground etc and stuff?  Where can I get those since I was not smart nuff to get it when I bought the bike.

aaron
Title: Re: Where to get parts at for the bike
Post by: DonTom on January 21, 2023, 06:16:00 AM
Pulled the bike into the garage today, was a real snug fit and got a tad close to the table saw and dinged one of the front flasher lights and cracked the case on  it.

where would I go to buy another one to put a new cover on it?

also with that, with things like this in mind, where would you go to get fairings etc as well for when the day comes you lay it down?

How about after market parts, like the kickstands,the specialty stands for holding the wheel up off the ground etc and stuff?  Where can I get those since I was not smart nuff to get it when I bought the bike.

aaron
Order from AF1 racing.  (https://www.af1racingaustin.com/)For both Zero and Energica.


-Don-  Reno, NV
Title: Re: Where to get parts at for the bike
Post by: wadejesu on January 21, 2023, 10:05:31 AM
I have a turn signal if you can't find one. PM me
Title: Re: Where to get parts at for the bike
Post by: MVetter on January 21, 2023, 10:58:34 AM
Also consider Energica of New England. https://www.energicaofnewengland.com/
Title: Re: Where to get parts at for the bike
Post by: Specter on January 21, 2023, 12:55:30 PM
Great, thank you ill have to call these places to get a new light cover.

Aaron
Title: Re: Where to get parts at for the bike
Post by: jotjotde on January 21, 2023, 05:21:01 PM
I doubt that you can get the indicator glass as a single part.
The complete indicator cost 44€ here in Germany.

Energica has a webshop but it’s for accessories only and practically dysfunctional. Most of the stuff shown in not available  ::)
https://shop.energicamotor.com/de/products

R&G Racing (UK based?) have some helpful stuff like tank grips, radiator guard etc.
https://www.rg-racing.com

In the US I found also this
https://www.filipacchi.com/
Title: Re: Where to get parts at for the bike
Post by: af1 racing on January 25, 2023, 02:30:17 AM
The turns signals are sold complete

front LH USA
https://www.af1racing.com/ENF001065-TURN-INDICATOR-FRONT-LH-REAR-RHUSA---ENF001065

front RH USA
https://www.af1racing.com/ENF001064-TURN-INDICATOR-FRONT-RH-REAR-LHUSA---ENF001064

in stock
Title: Re: Where to get parts at for the bike
Post by: jotjotde on January 25, 2023, 12:47:08 PM
Apparently the US version of the indicators is with incandescent bulbs while the EU version is with LED, but costs double  :o

Must be some issue with homologisation, I cannot think of any other reason why old fashioned indicators are installed. My Zero also had bulbs.
Right/Left have different connenctors (WTF why?).

Off-topic:
These connectors are, let's say, uncommon. I cannot find these anywhere (for fitting of OEM indicators). Can anyone help?