ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: Aikirob on October 17, 2022, 04:36:50 AM
-
So my 2016 dsr finally had its first hiccup after 6 years of ownership and 60k KMs.
Had a good run, the onboard charger is dying, I need a replacement, I would like to have a direct replacement so I can still plug it into the wall from home, but would also like a faster option if it's available.
What are my options and where can I buy them?
-
If you are in the US you can try here for the Calex unit. I don't see one offered at the moment but you can check with them.
Otherwise your nearest dealer.
https://www.af1racing.com/2014-2020-DS-DSR-Spare-Parts-Accessories
-
So my 2016 dsr finally had its first hiccup after 6 years of ownership and 60k KMs.
Had a good run, the onboard charger is dying, I need a replacement, I would like to have a direct replacement so I can still plug it into the wall from home, but would also like a faster option if it's available.
What are my options and where can I buy them?
Faster will be to buy a Zero Delta Q charger. (https://accessories.zeromotorcycles.com/products/quick-charger) Much more reliable but slightly less power. Will take a little longer to charge to full. Some Zero dealers keep them in stock.
It's an external charger.
And after you replace the OBC you can still use the DeltaQ for faster charging.
If you use the DeltaQ without the OBC, you will have to key on the bike first to start the charge.
-Don- Reno, NV
-
I already have an external fast charger, just need to replace the onboard charger.
-
I already have an external fast charger, just need to replace the onboard charger.
I guess I didn't understand your question. You're not going to find an OBC that will fit your DSR that is more powerful than the stock OBC. It's about 1.4KW and that is really pushing the limit for its size.
And when you said "faster" I wasn't sure if you meant charge faster or receive the charger faster.
-Don- Reno, NV
-
Ok then I'll just have to find a replacement part for it, I heard they improved the design of them so they don't fail as often?
Where can I order the part?
-
Ok then I'll just have to find a replacement part for it, I heard they improved the design of them so they don't fail as often?
Where can I order the part?
See the thread here (https://www.electricmotorcycleforum.com/boards/index.php?topic=10369.msg94690#msg94690)for a lot of helpful info. on getting and replacing that OBC.
I have my doubts if the newer one is any more reliable. Still 1.4 KW is a lot to ask from such a charger that is not cooled and in that small size. It's a switching power supply that have countless ways to fail and luck is what is most important. It will probably last longer if you never use 120 VAC as it's more efficient on 240 VAC which means less heat inside the OBC. But failures will be random.
I think the newer ones are probably redesigned to cause less radio interference more so than anything else.
-Don- Reno, NV
-
Looked over the thread and found nothing useful, can someone link me to where I can buy an onboard charger.
-
I posted a link to AF1 Racing as the first reply.
That's it.
You have to use a dealer near you other wise.
They have to be programed to work with Zero's setup so you can't just grab something from Amazon.
-
Looked over the thread and found nothing useful, can someone link me to where I can buy an onboard charger.
You will have to email AF1 racing (https://www.af1racingaustin.com/)and tell them what you need.
-Don- Reno, NV
-
https://www.af1racing.com/CALEX-CHARGER-ASSEMBLY-1300W-REG-105-EMC-COMPLIANT-ZM45-08123
-
https://www.af1racing.com/CALEX-CHARGER-ASSEMBLY-1300W-REG-105-EMC-COMPLIANT-ZM45-08123 (https://www.af1racing.com/CALEX-CHARGER-ASSEMBLY-1300W-REG-105-EMC-COMPLIANT-ZM45-08123)
I wonder why I couldn't find that when I searched for it. I could only find the FX OBC which is different.
-Don- Reno, NV
-
https://www.af1racing.com/CALEX-CHARGER-ASSEMBLY-1300W-REG-105-EMC-COMPLIANT-ZM45-08123 (https://www.af1racing.com/CALEX-CHARGER-ASSEMBLY-1300W-REG-105-EMC-COMPLIANT-ZM45-08123)
I wonder why I couldn't find that when I searched for it. I could only find the FX OBC which is different.
-Don- Reno, NV
The website could use some improvement, I could only find it by searching for the part number (ZM + Zero part number).