ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: ledmasters on July 16, 2022, 03:21:47 AM

Title: CEL after 48mi on 2022 Zero FX
Post by: ledmasters on July 16, 2022, 03:21:47 AM

Had my first CEL turn-on at 48mi on my 2022 Zero FX, then after a few miles of riding it turned off.
Downloaded the MBB and BMS logs and saw a BMS internal error and DTC code 3 was set. SOC~75%
Does this kind of DTC get reset after a number of key on-off cycles or miles driven with no other errors?
Bike ran fine, full torque and speed and only the kill switch and kickstand error codes that go to 00.
If this happens again I will for sure contact my dealer and send him the logs

Title: Re: CEL after 48mi on 2022 Zero FX
Post by: staples on July 20, 2022, 08:50:47 PM

Maybe I'm one of the few here not understanding what specific errors you are referring to. Any chance you can post the logs?

Title: Re: CEL after 48mi on 2022 Zero FX
Post by: ledmasters on July 27, 2022, 12:42:08 AM

Here is the log section for the fault, note I had another recent CEL for error code was 48 Sevcon startup issue:
 02278     07/14/2022 15:14:27   BMS 0 Internal Disable Received
 02279     07/14/2022 15:14:27   OBD-II - Set Confirmed DTC: 3 = P0A7B
 02280     07/14/2022 15:14:27   Dtc set because of BMS internal fault
 02281     07/14/2022 15:14:27   OBD: key cycle pending