ElectricMotorcycleForum.com
Marketplace => Buy Sell Trade => Topic started by: Skidz on April 24, 2022, 06:13:56 PM
-
For sale: Since I no longer have my trusty DSR I’m selling my external charge setup, which consists of 2 Eltek Flatpack S units programmed to 57.7V in series (Totaling 115,4V or around 85% SOC), and a Mennekes-to-J1772 3-phase splitter so this can be used on the European 3-phase public infrastructure. The Elteks have a custom PCB for tapping and inserting power and the Elteks deliver power to the bike through the auxilary Anderson connector. The J1772 uses phase 1 and phase 2 and 3 are broken out using a junction box with female C19 receptacles that are connected to phase 2 and 3. With the junction box and the v1 charge tank the max charge rate is 7.2kW meaning a full charge of a ZF13 takes 100 minutes.
Please be advised this is an experimental setup and the new owner should take care not to electrocute themselves when using this device! I used it a few dozen times with success but I cannot guarantee anything!
Asking price €400,-
More info on request. Shipping at the buyers expense.
(https://mijnzero.nl/meuk/eltek1.jpg)
(https://mijnzero.nl/meuk/eltek2.jpg)
(https://mijnzero.nl/meuk/eltek3.jpg)
(https://mijnzero.nl/meuk/eltek4.jpg)
(https://mijnzero.nl/meuk/eltek5.jpg)
-
What are the dimensions of this? I'm curious if it will fit in the lower storage compartment of my 7.2 model. Also am I reading that right that they're 1.8kW each, for a total of 3.6kW (I could only find 1kW models)?
-
The charge box is 27x12x7cm which is something like 10.5”x5”x2.75”. These are the 1.8kW models, as the picture with the front plates shows.
-
The charger is sold, so no longer available from me!