ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: jbzero4723 on December 18, 2021, 04:03:11 AM
-
Can someone please send me instructions for Zero SRS top rack installation. Thanks
-
Not much help but scroll down to page 4 and at least you will see a picture of it mounted
https://zero-cms-disco.cdn.prismic.io/zero-cms-disco/ef7c65cc-a3ee-4985-be75-28106fc98be6_Zero+Accessories+MY21.pdf (https://zero-cms-disco.cdn.prismic.io/zero-cms-disco/ef7c65cc-a3ee-4985-be75-28106fc98be6_Zero+Accessories+MY21.pdf)
-
Can someone please send me instructions for Zero SRS top rack installation. Thanks
There isn't one AFAIK.
My dealer tried to get from Zero and all they sent was Instructions for the DS ???
I've installed it though, so if any questions LMK.
The Bracket goes between Bike Frame & New Cover, to add strength.
Unfortunately the nice new cover, they give you, is undersized, for the thickness of the strengthening bracket.
Therefore, there's an unsightly Panel Gap, between the Tail Plastics, around the rear blinkers :(
-
Not sure if you found these Instructions, for the SR/F.
https://fotoleer.files.wordpress.com/2021/01/zm10-08214_d7.pdf (https://fotoleer.files.wordpress.com/2021/01/zm10-08214_d7.pdf)
Some of it applies to the SR/F.
At least, I know what the Foam Strips are for now (although I didn't need them).
BTW, you can use other Top Case, with that Mount (not limited to SH39).
I run the smaller SH34, but the lid fits loose & rattles, so I had to install weatherstrip to fill the looseness between lid and lower case.
I wonder if this trait is "normal" for Top-Boxes?
-
I was able to find the Installation Instructions Zero SRS Top Rack Assembly. If interested contact me and I’ll send you a pdf. The file is over 600 kB and will not upload to this site
-
I was able to find the Installation Instructions Zero SRS Top Rack Assembly. If interested contact me and I’ll send you a pdf.
You should be able to upload it here as an attachment as long as it is under 600KB in size. Or if you found it on another website, perhaps a link to where you found it. That way owners years from now will still be able to get it without requesting it from you.
-
The file is over 600kb and will not upload.
-
The file is over 600kb and will not upload.
Thanks jbzero4723 for emailing me a copy.
I was able to downsize the PDF so it can be attached here ;D
-
Thanks! My rack is already on but I'll add that to my documentation.
-
I was asked to show my "Fix" for the Shad Top Box Rattle.
I couldn't attach pictures to a PM, so I'm attaching them here.
The Shad Lid rattles horribly.
I guess ICE Bikes w/ Loud Exhaust would never know.
However, it ruins the experience for Electric Bike Riders.
I had to install Adhesive Felt & WeatherStripping in the Mating Surfaces of the Lid & Lower Box.
The lid needs more force to close, but the WS Foam loosens up after a while.
The rattle does go away after this.
-
2nd pic...
-
3rd pic...
-
4th pic....