ElectricMotorcycleForum.com

General Category => Pics and Vids => Topic started by: mdjak1 on October 25, 2021, 11:31:37 PM

Title: Finished the restoration of my 2017 FXS
Post by: mdjak1 on October 25, 2021, 11:31:37 PM

About 7 months ago I bought this well used, 12,000 mile, 2017 FXS 6.5 modular.   Stored outdoors all its life.  Sometimes with a cover, sometimes not.  Ridden in FL rain.  Zero name and model designations were gone.   Plastics looked like a daycare Little Tikes Cozy Coupe that had been left outside for 4 years.  BMS in one battery was dead.   Charging was at times intermittent.

https://imgur.com/uEsBRIO

First issue was the battery BMS.   After 5+ weeks of chasing the local dealer to get with Zero and fix it, and Zero customer service helping expedite it, the BMS was replaced.   

I added a rack to make the bike more useful in daily trips and errands.   

After not being able to find any product to rejuvenate the plastics, I decided to prime and paint them.   I went with white as I thought that brightened up the bike.   My rattle can technique wasn't particularly good.   So eventually I stripped and sanded them plastics and found a place that would prime, paint and clearcoat them for $175.   Finally I decided to spring for the Zero and FXS designations from AF1.   

I also got help on this board fixing the intermittent charging issue. 
https://www.electricmotorcycleforum.com/boards/index.php?topic=11400.0

To the Zero rack I added a rack extension plate from these guys:  https://www.perunmoto.com/

And here it is

https://imgur.com/Stk4JPe

https://imgur.com/E7xHzBb

Enjoying the FXS so much, I decided to pick up a low miles used 2018 SR from a guy in NC.   

https://imgur.com/GWRnnhG

https://imgur.com/s2LvdW7

Of the two, the FXS is hands down more fun to ride solo around town.  But my wife appreciates the seat on the SR much more than the FXS.   

Title: Re: Finished the restoration of my 2017 FXS
Post by: staples on October 26, 2021, 12:34:07 AM

And they match! Nice job.

Title: Re: Finished the restoration of my 2017 FXS
Post by: Crissa on October 26, 2021, 02:10:15 AM

Pretty!

Title: Re: Finished the restoration of my 2017 FXS
Post by: TheRan on October 26, 2021, 03:57:18 AM

The colour matched mudguard and headlight cowl look so much better

Title: Re: Finished the restoration of my 2017 FXS
Post by: mdjak1 on October 26, 2021, 07:31:45 AM

Quote from: TheRan on October 26, 2021, 03:57:18 AM

The colour matched mudguard and headlight cowl look so much better

Thanks.   I actually considered using a S painted low front fender like a couple of KTMs I've owned but at $127 for a new fender, it wasn't worth it.

https://imgur.com/8GgVwOy

https://imgur.com/XMYKh4M