ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2012 and older => Topic started by: aleks68 on March 13, 2021, 01:08:16 PM

Title: I ask for help on zero fx 2015
Post by: aleks68 on March 13, 2021, 01:08:16 PM

Hello everyone, with my zero the problem with the BMS, I assembled a new battery and put the ant BMS, but I don't know how to bypass the MBB, can anyone help with this problem I will be grateful for any help

Title: Re: I ask for help on zero fx 2015
Post by: Crissa on March 13, 2021, 02:52:39 PM

...You can't bypass the motherboard.  It tells all the other components what to do.  You'd have to completely replace it.  Which is... Maybe possible, if you programmed the interface for the motor controller or replaced the motor controller with one you had software for.

-Crissa

Title: Re: I ask for help on zero fx 2015
Post by: aleks68 on March 14, 2021, 04:05:48 PM

dear Crissa, my zero is programmed from the factory, are there any options to do without reprogramming and without MBB?

Title: Re: I ask for help on zero fx 2015
Post by: Crissa on March 14, 2021, 04:36:01 PM

No.

The MBB is the brains of the bike.  It takes the input from your controls, the details from the battery, and tells the motor controller what to do.  The bike doesn't work without it.

You might as well be asking how to operate a gas motor without valves or a timing belt.  It just doesn't work.

-Crissa

Title: Re: I ask for help on zero fx 2015
Post by: aleks68 on March 15, 2021, 11:22:39 AM

thanks Criss, when something changes I will publish