ElectricMotorcycleForum.com

Makes And Models => Other Electric Motorcycles => Topic started by: Electric_Mike on September 24, 2019, 10:58:23 PM

Title: 2001 Yamaha FZ1 conversion
Post by: Electric_Mike on September 24, 2019, 10:58:23 PM

Hey, I'm looking for some experience and a numbers guy that can quickly crunch and give me some input..
I'm being offered a 15hp induction motor I think is AC? as follows:
3 phase 60 cyc. 15hp
Max 40amp
Volts 208-220/440
It's a life line A ADNV
amps 44.5-43/21.5
Rpm 1805
The guys asking $50 is this workable?

Sent from my SM-G930P using Tapatalk

Title: 2001 Yamaha FZ1 conversion
Post by: Electric_Mike on September 24, 2019, 11:00:27 PM

Hey, I'm looking for some experience and a numbers guy that can quickly crunch and give me some input..
I'm being offered a 15hp induction motor I think is AC? as follows:
3 phase 60 cyc. 15hp
Max 40amp
Volts 208-220/440
It's a life line A ADNV
amps 44.5-43/21.5
Rpm 1805
The guys asking $50 is this workable?
(https://uploads.tapatalk-cdn.com/20190924/3919773ee20fe2bb1b7c9a7ce480177c.jpg)

Sent from my SM-G930P using Tapatalk

Title: 2001 Yamaha FZ1 conversion
Post by: Electric_Mike on September 24, 2019, 11:04:19 PM

Hey, I'm looking for some experience and a numbers guy that can quickly crunch and give me some input..
I'm being offered a 15hp induction motor I think is AC? as follows:
3 phase 60 cyc. 15hp
Max 40amp
Volts 208-220/440
It's a life line A ADNV
amps 44.5-43/21.5
Rpm 1805
The guys asking $50 is this workable?
   

Sent from my SM-G930P using Tapatalk

Title: 2001 Yamaha FZ1 conversion
Post by: Electric_Mike on September 24, 2019, 11:06:16 PM

Hey, I'm looking for some advice on a motor selection(https://uploads.tapatalk-cdn.com/20190924/0830d285be773dc20e1528b69f51a5af.jpg)(https://uploads.tapatalk-cdn.com/20190924/3bae7ddf30aa56cf9abce5bccd557221.jpg)

Sent from my SM-G930P using Tapatalk

Title: 2001 Yamaha FZ1 conversion
Post by: Electric_Mike on September 24, 2019, 11:06:31 PM

Hey, I'm looking for some advice on a motor selection(https://uploads.tapatalk-cdn.com/20190924/0830d285be773dc20e1528b69f51a5af.jpg)(https://uploads.tapatalk-cdn.com/20190924/3bae7ddf30aa56cf9abce5bccd557221.jpg)

Sent from my SM-G930P using Tapatalk

Title: Motor help..
Post by: Electric_Mike on September 28, 2019, 02:19:01 PM

I'm using a 2001 yamaha fz1 rolling chassis. I've been offered a westinghouse 15hp 3 phase induction motor.. for $40. Can I use this? It's an AC motor and was afraid that despite the deal in price.. can I use it? Any help would be greatly appreciated. Thanks

Sent from my SM-G930P using Tapatalk

Title: Motor help..
Post by: Electric_Mike on September 28, 2019, 02:32:07 PM

I'm using a 2001 yamaha fz1 rolling chassis. I've been offered a westinghouse 15hp 3 phase induction motor.. for $40. Can I use this? It's an AC motor and was afraid that despite the deal in price.. can I use it? Any help would be greatly appreciated. Thanks (https://uploads.tapatalk-cdn.com/20190928/4487c7162a955a229f3688df14951459.jpg)

Sent from my SM-G930P using Tapatalk

Title: VYVANSE,ADDERALL,XANAX PILLS FOR SALE
Post by: sadiassa on February 13, 2020, 05:42:22 PM

WHATSAPP/TEXT/CALL:+1(443) 281-3429
EMAIL:pamelawilliam02@gmail.com
Ketamine 250grams :$450 + Delivery.
Vyvanse 70 mg $5 Per pill
Hydros Yellows: 10/325-$4.50 each
Hydros Blues 10/500-$3.50 Each
30mg IR ritalin-$3.00 each
20 mg IR ritalin-$2.00 each
10mg IR ritalin-$1.5 each
30mg IR adderall-$3.00 each
20 mg IR adderall-$2.00 each
Percocet 5mg-round white- $3.00each
Percs 10mg-oblong with name percocet on one side-$6.00 each
Morphine-$11 each
Dilaudid 8mg-$6 each
Dilaudid 4mg-$3 each
Xannies (White and yellow Bars)-$3.00 each
Roxi 30 blues-$9.00 each-sale!!
OC 80's-$15.00 each

Text/Call/Whatsapp:+1(443) 281-3429(https://uploads.tapatalk-cdn.com/20200213/5a2fb08ebb3e5dec0bc5e6e6bfb84af3.jpg)

Sent from my SM-J320F using Tapatalk

Title: VYVANSE,ADDERALL,XANAX PILLS FOR SALE
Post by: sadiassa on February 13, 2020, 05:42:38 PM

WHATSAPP/TEXT/CALL:+1(443) 281-3429
Ketamine 250grams :$450 + Delivery.
Vyvanse 70 mg $5 Per pill
Hydros Yellows: 10/325-$4.50 each
Hydros Blues 10/500-$3.50 Each
30mg IR ritalin-$3.00 each
20 mg IR ritalin-$2.00 each
10mg IR ritalin-$1.5 each
30mg IR adderall-$3.00 each
20 mg IR adderall-$2.00 each
Percocet 5mg-round white- $3.00each
Percs 10mg-oblong with name percocet on one side-$6.00 each
Morphine-$11 each
Dilaudid 8mg-$6 each
Dilaudid 4mg-$3 each
Xannies (White and yellow Bars)-$3.00 each
Roxi 30 blues-$9.00 each-sale!!
OC 80's-$15.00 each

Text/Call/Whatsapp:+1(443) 281-3429

Sent from my SM-J320F using Tapatalk

Title: 2017 DS spec questions
Post by: hop_along on March 10, 2020, 11:27:36 PM

Two specific questions...new-to-me owner will pickup the bike from my sisters garage soon :-)

1: does anyone know the correct Sumitomo plug type used for accessory power? I am looking at Eastern Beaver for reference... -0047, -0026, etc. I assume it is a 2 pin plug?

2: front axle size? I believe Inunderstand it is a 20mm diameter by ...? The question really is being asked because (long story short) I may need to remove the front wheel for transport, and may build a stand to support the front.  I just dont want to lay it down on its side in the pickup then drive hundreds of smiles lol

Sent from my SM-G892U using Tapatalk

Title: 2017 DS spec questions
Post by: hop_along on March 10, 2020, 11:28:08 PM

Two specific questions...new-to-me owner will pickup the bike from my sisters garage soon :-)

1: does anyone know the correct Sumitomo plug type used for accessory power? I am looking at Eastern Beaver for reference... -0047, -0026, etc. I assume it is a 2 pin plug?

2: front axle size? I believe Inunderstand it is a 20mm diameter by ...? The question really is being asked because (long story short) I may need to remove the front wheel for transport, and may build a stand to support the front.  I just dont want to lay it down on its side in the pickup then drive hundreds of smiles lol

Thanks, Hop Along
New to me 2017 DS owner

Sent from my SM-G892U using Tapatalk

Title: 2017 DS spec questions
Post by: hop_along on March 10, 2020, 11:31:40 PM

Two specific questions...new-to-me owner will pickup the bike from my sisters garage soon :-)

1: does anyone know the correct Sumitomo plug type used for accessory power? I am looking at Eastern Beaver for reference... -0047, -0026, etc. I assume it is a 2 pin plug?

2: front axle size? I believe Inunderstand it is a 20mm diameter by ...? The question really is being asked because (long story short) I may need to remove the front wheel for transport, and may build a stand to support the front.  I just dont want to lay it down on its side in the pickup then drive hundreds of smiles lol

Thanks, Hop Along
New to me 2017 DS owner

Sent from my SM-G892U using Tapatalk

Title: 2017 DS spec questions
Post by: hop_along on March 10, 2020, 11:34:48 PM

Two specific questions...new-to-me owner will pickup the bike from my sisters garage soon :-)

1: does anyone know the correct Sumitomo plug type used for accessory power? I am looking at Eastern Beaver for reference... -0047, -0026, etc. I assume it is a 2 pin plug?

2: front axle size? I believe Inunderstand it is a 20mm diameter by ...? The question really is being asked because (long story short) I may need to remove the front wheel for transport, and may build a stand to support the front.  I just dont want to lay it down on its side in the pickup then drive hundreds of smiles lol

Thanks, Hop Along
New to me 2017 DS owner
Also apologies if this posts multiple times, having first timer issues lol


Sent from my SM-G892U using Tapatalk

Title: 2017 DS spec questions
Post by: hop_along on March 11, 2020, 12:34:38 AM

Two specific questions...new-to-me owner will pickup the bike from my sisters garage soon :-)

1: does anyone know the correct Sumitomo plug type used for accessory power? I am looking at Eastern Beaver for reference... -0047, -0026, etc. I assume it is a 2 pin plug?

2: front axle size? I believe Inunderstand it is a 20mm diameter by ...? The question really is being asked because (long story short) I may need to remove the front wheel for transport, and may build a stand to support the front.  I just dont want to lay it down on its side in the pickup then drive hundreds of smiles lol

Thanks, Hop Along
New to me 2017 DS owner

Sent from my SM-G892U using Tapatalk

Title: New to me '17 DS, questions
Post by: hop_along on May 12, 2020, 02:19:42 AM

Ok, New first time owner, long history with ICE bikes, bought a gently used Zero DS flr the quiet commute experience..

I've poked around a wee bit, but not finding answers to a few questions....probably due to my lame googly skills lol. 

-I can find references to folks storing the stock 110v charging cable "in the frame tube". Is there supposed to be a tube storage method, or plugs that cap off either end?

-I can find references to a Tool Kit from Zero being available.  I will assemble my own toolkit, but where do folks store theirs?
--if under the seat, where to store a T45 to remove the seat?

-is there a better seat removal method, compared to the T45? Its a pain with the Zero luggage rack installed (though its totes doable, just annoyingly inelegant); and I don't always travel with luggage to carry a T45 much less a toolkit.

-finally....what is this unconnected bullet connector for? Located under front of seat.
(https://uploads.tapatalk-cdn.com/20200511/1c237a7bb0f4ab3adec4780e3e65f7ff.jpg)

Thanks...really enjoying the quietude this ride provides.  And its a fun ride to boot!

Hop Along

Sent from my SM-G892U using Tapatalk

Title: New to me '17 DS, questions
Post by: hop_along on May 12, 2020, 02:19:52 AM

Ok, New first time owner, long history with ICE bikes, bought a gently used Zero DS flr the quiet commute experience..

I've poked around a wee bit, but not finding answers to a few questions....probably due to my lame googly skills lol. 

-I can find references to folks storing the stock 110v charging cable "in the frame tube". Is there supposed to be a tube storage method, or plugs that cap off either end?

-I can find references to a Tool Kit from Zero being available.  I will assemble my own toolkit, but where do folks store theirs?
--if under the seat, where to store a T45 to remove the seat?

-is there a better seat removal method, compared to the T45? Its a pain with the Zero luggage rack installed (though its totes doable, just annoyingly inelegant); and I don't always travel with luggage to carry a T45 much less a toolkit.

-finally....what is this unconnected bullet connector for? Located under front of seat.
(https://uploads.tapatalk-cdn.com/20200511/1c237a7bb0f4ab3adec4780e3e65f7ff.jpg)

Thanks...really enjoying the quietude this ride provides.  And its a fun ride to boot!

Hop Along

Sent from my SM-G892U using Tapatalk

Title: New to me '17 DS, questions
Post by: hop_along on May 12, 2020, 02:20:42 AM

Ok, New first time owner, long history with ICE bikes, bought a gently used Zero DS flr the quiet commute experience..

I've poked around a wee bit, but not finding answers to a few questions....probably due to my lame googly skills lol. 

-I can find references to folks storing the stock 110v charging cable "in the frame tube". Is there supposed to be a tube storage method, or plugs that cap off either end?

-I can find references to a Tool Kit from Zero being available.  I will assemble my own toolkit, but where do folks store theirs?
--if under the seat, where to store a T45 to remove the seat?

-is there a better seat removal method, compared to the T45? Its a pain with the Zero luggage rack installed (though its totes doable, just annoyingly inelegant); and I don't always travel with luggage to carry a T45 much less a toolkit.

-finally....what is this unconnected bullet connector for? Located under front of seat.
(https://uploads.tapatalk-cdn.com/20200511/1c237a7bb0f4ab3adec4780e3e65f7ff.jpg)

Thanks...really enjoying the quietude this ride provides.  And its a fun ride to boot!

Hop Along

Sent from my SM-G892U using Tapatalk

Title: New to me '17 DS, questions
Post by: hop_along on May 12, 2020, 02:21:58 AM

Ok, New first time owner, long history with ICE bikes, bought a gently used Zero DS flr the quiet commute experience..

I've poked around a wee bit, but not finding answers to a few questions....probably due to my lame googly skills lol. 

-I can find references to folks storing the stock 110v charging cable "in the frame tube". Is there supposed to be a tube storage method, or plugs that cap off either end?

-I can find references to a Tool Kit from Zero being available.  I will assemble my own toolkit, but where do folks store theirs?
--if under the seat, where to store a T45 to remove the seat?

-is there a better seat removal method, compared to the T45? Its a pain with the Zero luggage rack installed (though its totes doable, just annoyingly inelegant); and I don't always travel with luggage to carry a T45 much less a toolkit.

-finally....what is this unconnected bullet connector for? Located under front of seat.
(https://uploads.tapatalk-cdn.com/20200511/1c237a7bb0f4ab3adec4780e3e65f7ff.jpg)

Thanks...really enjoying the quietude this ride provides.  And its a fun ride to boot!

Hop Along

Sent from my SM-G892U using Tapatalk

Title: New to me 17DS
Post by: hop_along on May 12, 2020, 02:36:34 AM

Ok, New first time owner, long history with ICE bikes, bought a gently used Zero DS flr the quiet commute experience..

I've poked around a wee bit, but not finding answers to a few questions....probably due to my lame googly skills lol. 

-I can find references to folks storing the stock 110v charging cable "in the frame tube". Is there supposed to be a tube storage method, or plugs that cap off either end?

-I can find references to a Tool Kit from Zero being available.  I will assemble my own toolkit, but where do folks store theirs?
--if under the seat, where to store a T45 to remove the seat?

-is there a better seat removal method, compared to the T45? Its a pain with the Zero luggage rack installed (though its totes doable, just annoyingly inelegant); and I don't always travel with luggage to carry a T45 much less a toolkit.

-finally....what is this unconnected bullet connector for? Located under front of seat.


Thanks...really enjoying the quietude this ride provides.  And its a fun ride to boot!

Hop Along(https://uploads.tapatalk-cdn.com/20200511/d79aa90193f9f7afb4d9f22259c5bc4c.jpg)

Sent from my SM-G892U using Tapatalk

Title: New to me 17DS
Post by: hop_along on May 12, 2020, 02:43:23 AM

Ok, New first time owner, long history with ICE bikes, bought a gently used Zero DS flr the quiet commute experience..

I've poked around a wee bit, but not finding answers to a few questions....probably due to my lame googly skills lol. 

-I can find references to folks storing the stock 110v charging cable "in the frame tube". Is there supposed to be a tube storage method, or plugs that cap off either end?

-I can find references to a Tool Kit from Zero being available.  I will assemble my own toolkit, but where do folks store theirs?
--if under the seat, where to store a T45 to remove the seat?

-is there a better seat removal method, compared to the T45? Its a pain with the Zero luggage rack installed (though its totes doable, just annoyingly inelegant); and I don't always travel with luggage to carry a T45 much less a toolkit.

-finally....what is this unconnected bullet connector for? Located under front of seat.
(https://uploads.tapatalk-cdn.com/20200511/d79aa90193f9f7afb4d9f22259c5bc4c.jpg)

Thanks...really enjoying the quietude this ride provides.  And its a fun ride to boot!

Hop Along

Sent from my SM-G892U using Tapatalk

Title: New to me 17DS
Post by: hop_along on May 12, 2020, 02:44:05 AM

Ok, New first time owner, long history with ICE bikes, bought a gently used Zero DS flr the quiet commute experience..

I've poked around a wee bit, but not finding answers to a few questions....probably due to my lame googly skills lol. 

-I can find references to folks storing the stock 110v charging cable "in the frame tube". Is there supposed to be a tube storage method, or plugs that cap off either end?

-I can find references to a Tool Kit from Zero being available.  I will assemble my own toolkit, but where do folks store theirs?
--if under the seat, where to store a T45 to remove the seat?

-is there a better seat removal method, compared to the T45? Its a pain with the Zero luggage rack installed (though its totes doable, just annoyingly inelegant); and I don't always travel with luggage to carry a T45 much less a toolkit.

-finally....what is this unconnected bullet connector for? Located under front of seat.
(https://uploads.tapatalk-cdn.com/20200511/d79aa90193f9f7afb4d9f22259c5bc4c.jpg)

Thanks...really enjoying the quietude this ride provides.  And its a fun ride to boot!

Hop Along

Sent from my SM-G892U using Tapatalk

Title: New to me 17DS
Post by: hop_along on May 12, 2020, 02:54:16 AM

Ok, New first time owner, long history with ICE bikes, bought a gently used Zero DS flr the quiet commute experience..

I've poked around a wee bit, but not finding answers to a few questions....probably due to my lame googly skills lol. 

-I can find references to folks storing the stock 110v charging cable "in the frame tube". Is there supposed to be a tube storage method, or plugs that cap off either end?

-I can find references to a Tool Kit from Zero being available.  I will assemble my own toolkit, but where do folks store theirs?
--if under the seat, where to store a T45 to remove the seat?

-is there a better seat removal method, compared to the T45? Its a pain with the Zero luggage rack installed (though its totes doable, just annoyingly inelegant); and I don't always travel with luggage to carry a T45 much less a toolkit.

-finally....what is this unconnected bullet connector for? Located under front of the seat.


Thanks...really enjoying the quietude this ride provides.  And its a fun ride to boot!

Hop Along

Sent from my SM-G892U using Tapatalk

Title: Selling brammo empulse charger
Post by: donmuijs on June 10, 2020, 02:10:19 AM

Dear,

I have a brammo charger new in the box with all the cables.
Anyone interested?

Cheers leen

Verstuurd vanaf mijn Moto Z3 Play met Tapatalk

Title: Selling brammo empulse charger
Post by: donmuijs on June 10, 2020, 02:10:27 AM

Dear,

I have a brammo charger new in the box with all the cables.
Anyone interested?

Cheers leen

Verstuurd vanaf mijn Moto Z3 Play met Tapatalk

Title: Selling brammo empulse charger
Post by: donmuijs on June 10, 2020, 02:10:42 AM

Dear

I have a brammo charger new in the box with all the cables
Anyone interested

Cheers leen

Verstuurd vanaf mijn Moto Z3 Play met Tapatalk

Title: Selling brammo empulse charger
Post by: donmuijs on June 10, 2020, 02:12:49 AM

Dear

I have a brammo charger new in the box with all the cables
Anyone interested

Cheers leen(https://uploads.tapatalk-cdn.com/20200609/0ed14015aeace86526d719df47227de7.jpg)

Verstuurd vanaf mijn Moto Z3 Play met Tapatalk

Title: Brammo eltek charger
Post by: donmuijs on July 07, 2020, 12:03:31 PM

Brand new eltek charger for brammo in the box.
700 euro

0639229894

Leen

Verstuurd vanaf mijn Moto Z3 Play met Tapatalk

Title: Brammo eltek charger
Post by: donmuijs on July 07, 2020, 12:03:43 PM

Brand new eltek charger for brammo in the box.
700 euro

0639229894

Leen

Verstuurd vanaf mijn Moto Z3 Play met Tapatalk