ElectricMotorcycleForum.com
Makes And Models => Energica => Topic started by: MoneyFor on June 19, 2020, 10:48:00 PM
-
Is there a speed sensor on the Energica's that passes the data on to the ECU, as we know it on an ice bike ? if so, where is it located.
-
Most EVs estimate the speed from the motor rotation.
-Crissa
-
Thanks for the reply, so there is no external speedsensor that can be replaced then.
-
Probably not but hopefully Demoni will see this and provide some insights.
-
Thanks for the reply.
I am trying to find out if there is an external speed sensor like with an ICE bike. If this is the case, it may be possible to deceive the VCU with a Speedohealer, just like with my CanAm, so that the limiter is removed. My CanAm was limited at 105kmu or 65 mph , with the Speedohealer set at -50% ( is easy to read the tacho then :) , just multiply by 2 ) the limiter is gone because there is no way that this CanAm would reach 130 mph. So I was wondering if this could be done with a Energica as well.
-
According to the thread in the link below, the speedometer reads off the motor RPM.
https://www.electricmotorcycleforum.com/boards/index.php?topic=8856.msg75784#msg75784
-
Thanks your reply,