ElectricMotorcycleForum.com
Makes And Models => Energica => Topic started by: 05RAVEN on June 15, 2020, 12:44:03 PM
-
Has anyone replaced their front brake lever with an after market? I have a Ribelle on the way and have always had ASV levers. I am hoping someone here has knowledge of a lever that would work with the master cylinder. Thanks and hope this topic has not been covered already.
-
Your bike uses the same Brembo master cylinder as found on a Ducati 1198. In addition the 749 and 999 generation bikes master cylinders were different but use the same levers.
There are a ton of good brands that make levers for that mc, just make sure the levers will fit Brembo 10821051 or 10821010 style MC's.
-
Great info, thanks
-
Your bike uses the same Brembo master cylinder as found on a Ducati 1198. In addition the 749 and 999 generation bikes master cylinders were different but use the same levers.
There are a ton of good brands that make levers for that mc, just make sure the levers will fit Brembo 10821051 or 10821010 style MC's.
Thanks for the info! Very much appreciated!!!
-
Your bike uses the same Brembo master cylinder as found on a Ducati 1198.
Does this apply to all the Energica motorcycles? I have a 2019 Ego. Thanks.
-
Your bike uses the same Brembo master cylinder as found on a Ducati 1198.
Does this apply to all the Energica motorcycles? I have a 2019 Ego. Thanks.
Yes, all models of Energica motorcycles use the same front brake master cylinder.