I absolutely, positively found one of the two "Phantom" accessory 12 volt connectors. You Know how I am sure this time? It has a tag on it saying " ACCY 12V". Athough I didn't test it I am pretty sure about this because that it is what Zero claims it is. It's the front one shown under the "tank" in the owners manual. You need to remove the tank which isn't hard at all. On each side of the front of the tank there are two extension pieces (they are silver on may red bike) There are two screws in each. Only the bottom one that attaches to the trellis frame on each side needs to be removed. There are screws one either side of the ignition switch that need to be removed and finally at the very rear of the tank, there are two screws by the hinge for the charge port access cover that need to come out. Once these six screws are removed, the tank will be loose. You just need to work it up to get by some harnesses and the rubber cover that goes around the charge port. None of the screws in the "box" inside the tank need to be removed---the box and the USB and DTC connector just remains in place. You will find the accessory connector tucked into the wiring harness near the ignition switch. The wire comes from the left side of the bike and contains a blue and black wire. There is a black vinyl cover protecting the plug so as you retrieve the plug make sure to hang on to the cover so it doesn't fall off.
Unfortunately, the connector is not the "SAE" rubber connector we are all used to, but a specialized connector that will require finding out what it's mate is from zero or by taking matters into our own hands with a pair of wire cutters and some crimp connectors.
When you replace the tank make sure you engage the clip located on each side that connects the lower black part (that has the tank cover release key lock in it) on the left into the tab on the frame. One of these clips was not in place on my bike and that's why I removed the tank in the first place. Finding the accessory connector was second. I still haven't found the rear connector yet.