Hello,
Find below how I changed the face of my Zero:
The first action is to move the pile of wires and connectors located behind the headlight under the compartment of the "tank" see photos and to realise a sheathing the wires to redirect the cables to the front.
Then it is necessary to realize a plate of fixation not provided by the provider and I used and modified the support of the original (Photo).
On the other hand I had to go down the turns signal because otherwise they touch the "tank".
Here is a picture with the dipped headlights and lights of the new lighthouse.
The lower part of the headlight lights up when the high beam is on. On the other hand I have not yet tested at night ...
Caracteristics of the
Truck-Lite LED HeadlightLower current requirement means less drain on the alternator, thus reducing consumption.
Low beam, high beam and parking light
12 V 31/18 W
Dimensions: Dia. approx. 177 mm, depth approx. 97 mm
Fits in many 7-inch
Sturdy, coated polycarbonate lens
Die-cast aluminium housing conforms to US military standards
Metallized reflector for clear, sharp illumination
Encapsulated electronics protect against corrosion and vibration (important for vehicles that are subject to powerful vibrations)
H4 connector
E-approved
Due to the illumination which is developed for right-hand traffic, it is not recommended to use this headlight in left-hand traffic.
http://www.truck-lite.comIf you need more...
Gil from France World Champion **
Author
Topic: New Headlight, New Look! (Read 1618 times)