Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[grmarks]

I've had issues with HID lights. I believe it may disrupt the CAN. I was able to solve this problem by installing a ferrite core on the HID wires, downstream of the ballast.

Sent from my SAMSUNG-SM-G920A using Tapatalk

So now I am wondering why mine has not caused a problem, there is no ferrite core on the HID leads? Luck?

[wijnand71]

I came across this solution:

https://www.retrofitlab.com/en/motor/yamaha-mt03-mh1.html

Decent projector solution. I think I'm trying this one.

@grmarks, where did you place this core exactly? In the blue high voltage (negative) wire or in the 12v negative of the ballast?

[grmarks]

I came across this solution:

https://www.retrofitlab.com/en/motor/yamaha-mt03-mh1.html

Decent projector solution. I think I'm trying this one.

@grmarks, where did you place this core exactly? In the blue high voltage (negative) wire or in the 12v negative of the ballast?

I didn't Harlan did.

[grmarks]

Its been a long time coming but finally here is the pic of where I mounted the HID driver box in the front wing of the fake tank