ElectricMotorcycleForum.com

  • November 26, 2024, 06:25:15 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

Electric Motorcycle Forum is live!

Pages: [1] 2 3

Author Topic: IXXAT interface to program with the Zero 2012+ SEVCON motor controller  (Read 9777 times)

Doctorbass

  • Battery tech
  • Hero Member
  • *****
  • Posts: 971
    • View Profile
    • Endless-sphere.com

I just saw that on ebay today.

These are very RARE and usually expensive. These ar ethe one that still can work with the DVT software you can download for free over the internet.

http://www.ebay.com/itm/IXXAT-USB-to-CAN-compact-V-1-5-USB-interface-for-CAN-1-01-0087-10100-/111783906227?hash=item1a06d70bb3

used, only  150$.. more than 10 availlable!!!!

These are V1.5 so these are NOT isolated and require more care when connecting to the controller.  V1.6 are even more RARe but are isolated.




Doc
« Last Edit: October 19, 2015, 11:51:40 AM by Doctorbass »
Logged
Zero Drag racing bike: 12.2s 1/4 mile and 7.3s 1/8 mile

T w i t t e r  :     http://twitter.com/DocbassMelancon

frodus

  • Hero Member
  • *****
  • Posts: 697
    • View Profile
Re: IXXAT interface to program with the Zero 2012+ SEVECON motor controller
« Reply #1 on: October 11, 2015, 12:21:41 AM »

Get these asap if you want one, cause they don't make the old ones anymore (the ones that work with the DVT available online.

The new one only works with sevcon software that requires a key, and its a PITA to get.
Logged
Travis

dean mcneil

  • Newbie
  • *
  • Posts: 46
    • View Profile
Re: IXXAT interface to program with the Zero 2012+ SEVECON motor controller
« Reply #2 on: October 13, 2015, 12:28:13 AM »

I have a 2014 ,  what can it program,will it work on the sevcon size 6.
Logged

RNM

  • Jr. Member
  • **
  • Posts: 65
    • View Profile
Re: IXXAT interface to program with the Zero 2012+ SEVECON motor controller
« Reply #3 on: October 18, 2015, 05:24:35 AM »

Frodus, this version is compatible with the older version of the DVT, are you sure?

Send me a PM if you have the DVT!!!!

Thank you for the heads up, Doc.

Enviado do meu K014 através de Tapatalk

Logged

frodus

  • Hero Member
  • *****
  • Posts: 697
    • View Profile
Re: IXXAT interface to program with the Zero 2012+ SEVECON motor controller
« Reply #4 on: October 18, 2015, 07:21:40 AM »

Frodus, this version is compatible with the older version of the DVT, are you sure?

Send me a PM if you have the DVT!!!!

Thank you for the heads up, Doc.

Enviado do meu K014 através de Tapatalk
Yes. Old ixxat cable works with old software. New ixxat only works with new software which requires a key. I have new software and new cable so it doesn't matter to me.....but these are the same cables I used to use.
Logged
Travis

BrianTRice@gmail.com

  • Unofficial Zero Manual Editor
  • Hero Member
  • *****
  • Posts: 4014
  • Nerdy Adventurer
    • View Profile
    • Personal site
Re: IXXAT interface to program with the Zero 2012+ SEVECON motor controller
« Reply #5 on: October 18, 2015, 08:01:39 AM »

I have decided to cross the line into Sevcon firmware modification now, so thanks for posting this!
Logged
Current: 2020 DSR, 2012 Suzuki V-Strom
Former: 2016 DSR, 2013 DS

Doctorbass

  • Battery tech
  • Hero Member
  • *****
  • Posts: 971
    • View Profile
    • Endless-sphere.com
Re: IXXAT interface to program with the Zero 2012+ SEVCON motor controller
« Reply #6 on: October 19, 2015, 11:54:08 AM »

Good Luck Brian, you will need patience!

I just finished rebuilding a DCF file for my 2012 75-7 + Size 6 controller and it seem to work fine...


I suggest using Winmerge to compare various DCF files and  understand the differences. Also having the Sevcon application note document help alot !!

Doc
Logged
Zero Drag racing bike: 12.2s 1/4 mile and 7.3s 1/8 mile

T w i t t e r  :     http://twitter.com/DocbassMelancon

BrianTRice@gmail.com

  • Unofficial Zero Manual Editor
  • Hero Member
  • *****
  • Posts: 4014
  • Nerdy Adventurer
    • View Profile
    • Personal site
Re: IXXAT interface to program with the Zero 2012+ SEVCON motor controller
« Reply #7 on: October 20, 2015, 02:59:04 AM »

Good Luck Brian, you will need patience!

I just finished rebuilding a DCF file for my 2012 75-7 + Size 6 controller and it seem to work fine...

I suggest using Winmerge to compare various DCF files and  understand the differences. Also having the Sevcon application note document help alot !!

Thanks for the "application note" suggestion.

I'm a Mac-using software developer with some firmware experience, so will be running Windows inside a virtual machine and will thankfully have a good set of tools to understand what's going on. If I'm really lucky, the DVT software is non-obfuscated C# and some of the logic will be extractable from what seems to be a terrible UI.
Logged
Current: 2020 DSR, 2012 Suzuki V-Strom
Former: 2016 DSR, 2013 DS

chdfarl

  • Full Member
  • ***
  • Posts: 139
    • View Profile
Re: IXXAT interface to program with the Zero 2012+ SEVCON motor controller
« Reply #8 on: November 22, 2015, 10:30:49 AM »

I know this has been mentioned on a few threads but not for a while. Is there a place to download the original DVT software.
« Last Edit: November 22, 2015, 11:03:53 AM by chdfarl »
Logged

chdfarl

  • Full Member
  • ***
  • Posts: 139
    • View Profile
Re: IXXAT interface to program with the Zero 2012+ SEVCON motor controller
« Reply #9 on: November 23, 2015, 11:25:30 PM »

Really none of you guys have or know where to find a copy of the DVT that isn't $900. I'd like to buy one of the those ixxat cables to run the Vectrix diagnostic on my VX2 but would like to know that the option to plug into the gen4 is there either on the scooter or any other bike project or production.
Logged

Burton

  • Hero Member
  • *****
  • Posts: 1059
    • View Profile
Re: IXXAT interface to program with the Zero 2012+ SEVCON motor controller
« Reply #10 on: November 23, 2015, 11:41:11 PM »

Often those people who go out and buy a 1.5 or 1.6 IXXAT cable (aka a gen 1 cable) will simply post up they are looking for a working copy of DVT and someone magically will PM them with the information. ;)

If you get a IXXAT cable make sure it is a first gen like DoctorBass posted or you will require a licensed copy of DVT to interface with any SEVCON GEN4 Controller and this requires you are a company not an individual ;)
Logged
All content I have created here http://bit.ly/1NX4KP9

chdfarl

  • Full Member
  • ***
  • Posts: 139
    • View Profile
Re: IXXAT interface to program with the Zero 2012+ SEVCON motor controller
« Reply #11 on: November 24, 2015, 12:53:20 AM »

That's why I posted on here. It's my understanding that the ones on eBay are the right cables but it's only worth buying if there is software available. I know that there are a lot of people who have done it and I highly doubt that they bought the ridiculously priced kit. The auction ends in five days and though the Vectrix software is easy to find and free I don't know if it's worth buying the ixxat for that alone. I appreciate your reply Burton, I'll wait and see if something pops up in the next five days.

By the way do the old cables or software run with the Gen4s that were sold after Sevcon instituted the license.
« Last Edit: November 24, 2015, 12:58:33 AM by chdfarl »
Logged

Burton

  • Hero Member
  • *****
  • Posts: 1059
    • View Profile
Re: IXXAT interface to program with the Zero 2012+ SEVCON motor controller
« Reply #12 on: November 24, 2015, 03:39:49 AM »

I honestly don't know but I do know my gen4 size 6 controller purchased in 2013/2014 works fine with my ancient version of DVT ;)

I can't see why this wouldn't be the case for newer firmware DVT's ... I have also been informed even post firmware update to support the IPM my version of DVT will still work so I would imagine it would.

You could email SEVCON and ask them something like this:
Quote
I have an older IXXAT cable and DVT software, if I buy a brand new Gen4 Controller an I use what I already have to interface with it?

provide as little information as possible ;) 
Logged
All content I have created here http://bit.ly/1NX4KP9

Farfle

  • Newbie
  • *
  • Posts: 32
    • View Profile
Re: IXXAT interface to program with the Zero 2012+ SEVCON motor controller
« Reply #13 on: November 28, 2015, 01:34:06 AM »

Woot! Snagged one!
Logged

dean mcneil

  • Newbie
  • *
  • Posts: 46
    • View Profile
Re: IXXAT interface to program with the Zero 2012+ SEVCON motor controller
« Reply #14 on: December 09, 2015, 12:59:48 AM »

Anyone know where I can get a cable and software for 2014, I've got a Hollywood dongle ,will a handheld programmer work   I need to change torque curve and gear ratios for staters
Logged
Pages: [1] 2 3